IP-Portal.org
Brand

Yoigo Router Login

Yoigo devices use a web-based admin panel for configuration. Common default credentials are listed below. This page also includes troubleshooting tips if the login page does not load.

Brands

// brands

top 25 brands

Yoigo

// router overview

Yoigo routers, primarily ZTE and Huawei models, use 192.168.1.1 for admin access. Default credentials often include '1234' for both username and password. The interface varies slightly between ZTE and Huawei models.

Manufacturer
Yoigo
Device type
router
Common models
ZTE H367A / H267N, ZTE F680 / H208N, Huawei HG659
Firmware
Yoigo Custom · Spain

Yoigo routers differ from standard ZTE/Huawei units by using simplified credentials (1234/1234 instead of complex defaults) and slightly modified interfaces optimized for their Spanish network. Carrier-specific firmware may limit some advanced features.

Web interface

// common ip addresses

192.168.1.1PrimaryOn record192.168.0.1Alternative IP for some Yoigo models192.168.1.254Less common but documented for certain units

Models on record

// models

  • ZTE H367A / H267NUses 1234/1234 credentials, WLAN settings under Local Network
  • ZTE F680 / H208NUses 1234/1234 credentials, WLAN settings under Network
  • Huawei HG659Uses user/user credentials, WLAN settings under Set Up WLAN

Log in to your Yoigo router

// login steps

  1. 01

    Open the Yoigo web interface at 192.168.1.1 or 192.168.0.1 or 192.168.1.254.

  2. 02

    Open a browser and type http://192.168.1.1 in the address bar.

  3. 03

    Enter the Username and Password and click Login.

  4. 04

    You will be logged in to the Yoigo router settings.

Change the Wi-Fi password on Yoigo

// wifi key

  1. 01

    Log in to http://192.168.1.1 using your model's credentials

  2. 02

    For ZTE models: Navigate to the same menu as SSID settings (WLAN Basic or WLAN Radio2.4G)

  3. 03

    For Huawei models: Select Set Up WLAN > Security Settings

  4. 04

    Locate the WPA Pre-Shared Key or similar field

  5. 05

    Enter new password (8-63 characters recommended)

  6. 06

    Save changes and reconnect devices

Change the Wi-Fi name on Yoigo

// wifi name

  1. 01

    Log in to http://192.168.1.1 using your model's credentials

  2. 02

    For ZTE models: Navigate to Local Network > WLAN > WLAN Basic > WLAN SSID Configuration (H367A) or Network > WLAN Radio2.4G(Online) > SSID Settings (F680)

  3. 03

    For Huawei models: Select Set Up WLAN > WLAN 2.4 GHz SSID

  4. 04

    Enter new SSID name in the designated field

  5. 05

    Save changes and reboot router if prompted

Factory reset this Yoigo

// factory reset

  1. 01

    Locate reset button (usually recessed) on router back panel

  2. 02

    Use a paperclip to hold for 10-15 seconds until LEDs blink

  3. 03

    Wait 5 minutes for full reboot (settings revert to defaults)

  4. 04

    Reconfigure using default credentials (Wi-Fi name/password will reset)

Change the admin password on Yoigo

// admin password

  1. 01

    Log in to http://192.168.1.1 using default credentials

  2. 02

    For ZTE models: Navigate to Management > User Management (exact path may vary)

  3. 03

    For Huawei models: Select System Tools > Modify Password (confidence: medium)

  4. 04

    Enter current and new admin passwords

  5. 05

    Save changes and note new credentials securely

If the login page does not open

// diagnostics

Having trouble accessing your Yoigo router settings? Connection issues, rejected credentials, and slow-loading admin pages are common problems. Below are the most frequent issues and how to fix them quickly.

Frequently asked questions

// faq

Related routers and IP addresses

// related

Pages that share this brand or this address.

IP addresses

192.168.1.1
All IPsAll brandsAll hosts