Which address should I use to log in to a AT&T router?

The default login address is 192.168.1.254. Enter it in the address bar of your browser to open the login page. If that does not work, try 192.168.1.1 or 192.168.0.1.

What can I do if 192.168.1.254 does not open?

Confirm that your device is connected directly to the router. Check the address for typos. Restart the router and wait about 30 seconds. Disable any VPN or proxy connections. If the problem persists, look up the correct gateway address in the network settings of your device.

How do I make my router more secure?

Change the default admin password to something unique. Enable WPA3 or WPA2 encryption for Wi-Fi. Disable WPS if you do not use it. Keep the firmware updated. Consider hiding the SSID if you want extra privacy.

I have multiple routers — which one am I logging into?

Make sure you are connected to the specific router you want to configure. Each device on the network may have a different admin address. Check which gateway your device is currently using in the network settings.

How do I change the Wi-Fi name (SSID)?

In the router admin panel, open the Wi-Fi settings and find the field for the network name (SSID). Enter the new name and save the changes. Your devices will find the network under the new name.

Brand

AT&T Router Login

This page covers how to log in to a AT&T router and configure common settings. The admin panel is usually available at 192.168.1.254. You will find the default login address, common credentials, and instructions for changing Wi-Fi settings.

AT&T

// router overview

AT&T routers typically use 192.168.1.254 for admin access. Many models require no username (leave blank) with 'attadmin' as the default password. ISP-managed firmware updates may override local settings.

Manufacturer: AT&T
Device type: router
Common models: Pace 5268AC, Arris BGW210
Firmware: AT&T U-verse · North America / AT&T Fiber · US

Unlike consumer routers, AT&T gateways prioritize ISP control—many settings are cloud-managed. The web UI often lacks options available on Netgear or TP-Link devices.

Web interface

// common ip addresses

192.168.1.254PrimaryOn record 192.168.1.1Alternate IP reported on some older models

Models on record

// models

Pace 5268ACCommon fiber gateway with dual-band WiFi
Arris BGW210Frequently issued for AT&T Fiber with IP passthrough support

Log in to your AT&T router

// login steps

01
Open the AT&T web interface at 192.168.1.254 or 192.168.1.1.
02
Make sure your device (computer, phone, or tablet) is connected to the router — either via Wi-Fi or with an Ethernet cable plugged directly into the router.
03
Open any web browser and type http://192.168.1.254 into the address bar. Press Enter. If the page does not load, try 192.168.1.1 or 192.168.0.1 instead.
04
Wait for the login page to appear. This may take a few seconds.
05
Enter the login credentials. If you have never changed them, check the sticker on the back of the router or the documentation from your Internet provider.
06
After logging in, you will see the router dashboard where you can manage all settings.

Change the Wi-Fi password on AT&T

// wifi key

01
Go to Settings > LAN > Wi-Fi after login
02
Check 'Use Custom Wi-Fi Network Password'
03
Enter new password in the designated field
04
Apply changes (confirmation varies by firmware version)

Change the Wi-Fi name on AT&T

// wifi name

01
Log in and navigate to Settings > LAN > Wi-Fi
02
Under 'User Network', edit the 'Network Name (SSID)' field
03
Save changes (may require router reboot)

Factory reset this AT&T

// factory reset

01
Locate recessed reset button near power port
02
Use a paperclip to hold for 15+ seconds until LEDs blink
03
Wait 5+ minutes for full reset (ISP may push reconfigured settings)

Change the admin password on AT&T

// admin password

01
Warning: AT&T often restricts admin password changes on ISP-provided gateways
02
If available: Locate 'Admin Password' under System or Security settings (confidence: medium)
03
Enter current and new credentials (blank username if unchanged)

Device information

// device intel

Factory Reset AT&T Router

There can be many instances where you need to factory reset your AT&T router because you forgot the admin password, can’t access the router web interface page, or messed up with the settings. In such cases, a factory reset becomes essential to reset everything back to factory default. Here is how you can factory reset your AT&T router:

If the login page does not open

// diagnostics

Having trouble accessing your AT&T router settings? Connection issues, rejected credentials, and slow-loading admin pages are common problems. Below are the most frequent issues and how to fix them quickly.

Frequently asked questions

// faq

Related routers and IP addresses

// related

Pages that share this brand or this address.

IP addresses

192.168.1.254

Brands

AT&T Mobile Hotspot Login

Hostnames

Att.homebase Attlocal.net

All IPs All brands All hosts