Which address should I use to log in to a AT&T hotspot?

The default login address is 192.168.1.1. Enter it in the address bar of your browser to open the login page. If that does not work, try 192.168.0.1 or 192.168.100.1.

What are the default login credentials for AT&T Mobile Hotspot?

The most commonly reported default credentials are admin / attadmin. These may have been changed by your ISP or during a previous setup. Check the sticker on the hotspot if they do not work.

What can I do if 192.168.1.1 does not open?

Confirm that your device is connected directly to the hotspot. Check the address for typos. Restart the hotspot and wait about 30 seconds. Disable any VPN or proxy connections. If the problem persists, look up the correct gateway address in the network settings of your device.

My ISP changed the default credentials — what now?

Many Internet service providers set custom login credentials during installation. Check the documentation your ISP provided, or contact their support. A factory reset will restore manufacturer defaults but may also reset Internet connection settings.

How do I reset a AT&T hotspot to factory settings?

Press and hold the reset button on the back of the hotspot for at least 10 seconds. The hotspot will restart with factory defaults, including the original login credentials. Note that this will also erase any custom settings.

Brand

AT&T Mobile Hotspot Login

Looking for the login page of your AT&T Mobile Hotspot? The most common login address is 192.168.1.1. Some models also respond on 192.168.0.1. This guide walks you through the login, default credentials, and basic Wi-Fi configuration.

AT&T Mobile

// router overview

AT&T routers and hotspots provide reliable connectivity with user-friendly web interfaces. Common login IPs include 192.168.1.1, and default credentials are often admin/attadmin. Specific models like NETGEAR Nighthawk and Franklin A10 have unique setup steps.

Manufacturer: AT&T
Device type: hotspot
Common models: NETGEAR Nighthawk Mobile Hotspot, Franklin A10 / A50, AT&T Turbo Hotspot 2, Moxee Mobile Hotspot
Firmware: AT&T Firmware v1.0 · North America

AT&T routers often use specific IPs like 192.168.1.1 and default credentials such as admin/attadmin, differing from other brands that may use different defaults or IP ranges.

Web interface

// common ip addresses

192.168.1.1PrimaryOn record 192.168.0.1Secondary IP occasionally used 192.168.1.254Alternative IP for some AT&T devices 10.0.0.1Less common but documented IP

Models on record

// models

NETGEAR Nighthawk Mobile HotspotAccessed via http://attwifimanager
Franklin A10 / A50Accessed via http://mobile.hotspot
AT&T Turbo Hotspot 2Accessed via http://hotspot.webui
Moxee Mobile HotspotAccessed via http://192.168.1.1 or http://device.webui

Log in to your AT&T hotspot

// login steps

01
Open the AT&T Mobile web interface at 192.168.1.1 or 192.168.0.1 or 192.168.1.254 or 10.0.0.1.
02
Make sure your device (computer, phone, or tablet) is connected to the hotspot — either via Wi-Fi or with an Ethernet cable plugged directly into the hotspot.
03
Open any web browser and type http://192.168.1.1 into the address bar. Press Enter. If the page does not load, try 192.168.0.1 or 192.168.100.1 instead.
04
Wait for the login page to appear. This may take a few seconds.
05
Enter admin as the username and attadmin as the password. Then click the login button.
06
After logging in, you will see the hotspot dashboard where you can manage all settings.

Change the Wi-Fi password on AT&T Mobile

// wifi key

01
Log in to the AT&T web interface.
02
Go to Settings > WiFi > Basic.
03
Enter the new Wi-Fi password in the Password field.
04
Save changes and reconnect devices.

Change the Wi-Fi name on AT&T Mobile

// wifi name

01
Log in to the AT&T web interface.
02
Navigate to Settings > Setup > Wireless.
03
Enter the new Wi-Fi Network Name in the WiFi Name (SSID) field.
04
Save changes and restart the router if prompted.

Factory reset this AT&T Mobile

// factory reset

01
Locate the reset button on the back of the router.
02
Hold the reset button for 10 seconds using a paperclip.
03
Wait for the router to reboot and restore factory settings.
04
Reconfigure the router using the default credentials.

Change the admin password on AT&T Mobile

// admin password

01
Log in to the AT&T web interface.
02
Navigate to Settings > Admin > Password.
03
Enter the current password and the new password.
04
Save changes and log in again with the new credentials.

Device information

// device intel

AT&T Turbo Hotspot 2

Note: The admin password is the last 8-digits of the IMEI code, which is printed on the device label underneath the battery. IMEI code is also listed on the Device Details screen of your device.

Moxee Mobile Hotspot

Note: The password is printed on a label in the battery compartment of your Mobile Hotspot.

If the login page does not open

// diagnostics

Having trouble accessing your AT&T hotspot settings? Connection issues, rejected credentials, and slow-loading admin pages are common problems. Below are the most frequent issues and how to fix them quickly.

Frequently asked questions

// faq

Related routers and IP addresses

// related

Pages that share this brand or this address.

IP addresses

192.168.1.1

Brands

AT&T Router Login

Hostnames

Att.homebase Attlocal.net

All IPs All brands All hosts