Which address should I use to log in to a NETGEAR router?

The default login address is www.routerlogin.net. Enter it in the address bar of your browser to open the login page. If that does not work, try 192.168.1.1 or 192.168.0.1.

What are the default login credentials for NETGEAR router?

The most commonly reported default credentials are admin / password. These may have been changed by your ISP or during a previous setup. Check the sticker on the router if they do not work.

What can I do if www.routerlogin.net does not open?

Confirm that your device is connected directly to the router. Check the address for typos. Restart the router and wait about 30 seconds. Disable any VPN or proxy connections. If the problem persists, look up the correct gateway address in the network settings of your device.

My ISP changed the default credentials — what now?

Many Internet service providers set custom login credentials during installation. Check the documentation your ISP provided, or contact their support. A factory reset will restore manufacturer defaults but may also reset Internet connection settings.

How do I change the Wi-Fi password on a NETGEAR router?

Log in to the router admin panel, navigate to the Wi-Fi security settings, and enter a new password. Click Save or Apply. All connected devices will need to reconnect with the new password.

How do I reset a NETGEAR router to factory settings?

Press and hold the reset button on the back of the router for at least 10 seconds. The router will restart with factory defaults, including the original login credentials. Note that this will also erase any custom settings.

Brand

NETGEAR Router Login – routerlogin.net

This is a detailed guide for the NETGEAR router admin panel, typically accessible at www.routerlogin.net. Below you will find step-by-step login instructions, default credentials, and configuration tips for Wi-Fi name, password, and troubleshooting. The most common default credentials are admin / password.

NETGEAR

// router overview

NETGEAR routers are known for their user-friendly web interface accessible via routerlogin.net or specific private IPs. They offer straightforward steps for managing Wi-Fi settings and admin credentials.

Manufacturer: NETGEAR
Device type: router
Common models: Nighthawk, Orbi
Firmware: Comcast Xfinity · USA

NETGEAR routers stand out with their easy-to-use web interface and the routerlogin.net hostname, which simplifies access compared to other brands that rely solely on IP addresses.

Web interface

// common ip addresses

192.168.1.1Commonly used for NETGEAR router login 192.168.0.1Alternative IP for some NETGEAR models 192.168.100.1Used for specific NETGEAR modem-router combos 192.168.1.254Less common but documented for certain NETGEAR devices 10.0.0.1Used for NETGEAR routers with specific configurations

Models on record

// models

NighthawkHigh-performance routers with advanced features
OrbiMesh Wi-Fi systems for large coverage areas

Log in to your NETGEAR router

// login steps

01
Open the NETGEAR web interface at 192.168.1.1 or 192.168.0.1 or 192.168.100.1 or 192.168.1.254 or 10.0.0.1.
02
Open a browser and type 192.168.1.1 or routerlogin.net.
03
Enter Username: admin and Password: password and click OK.
04
You will be logged in to your NETGEAR router.

Change the Wi-Fi password on NETGEAR

// wifi key

01
Open a browser and navigate to 192.168.1.1 or routerlogin.net.
02
Log in using the username 'admin' and the password 'password'.
03
Go to the 'Wireless' tab in the left-hand menu.
04
In the Security Options (WPA2-PSK), enter the new Password (Network Key).
05
Click 'Apply' to save the changes.

Change the Wi-Fi name on NETGEAR

// wifi name

01
Open a browser and navigate to 192.168.1.1 or routerlogin.net.
02
Log in using the username 'admin' and the password 'password'.
03
Go to the 'Wireless' tab in the left-hand menu.
04
Enter the new Wireless Network Name (SSID) in the provided field.
05
Click 'Apply' to save the changes.

Factory reset this NETGEAR

// factory reset

01
Locate the reset button on the back of the NETGEAR router.
02
Use a paperclip to press and hold the reset button for 7 seconds.
03
Release the button and wait for the router to reboot.
04
The router will restore to factory default settings.

Change the admin password on NETGEAR

// admin password

01
Open a browser and navigate to 192.168.1.1 or routerlogin.net.
02
Log in using the username 'admin' and the password 'password'.
03
Go to the 'Advanced' tab and select 'Administration'.
04
Enter the new admin password in the 'Set Password' field.
05
Click 'Apply' to save the changes.

If the login page does not open

// diagnostics

Having trouble accessing your NETGEAR router settings? Connection issues, rejected credentials, and slow-loading admin pages are common problems. Below are the most frequent issues and how to fix them quickly.

Frequently asked questions

// faq

Related routers and IP addresses

// related

Pages that share this brand or this address.

Hostnames

routerlogin.net Aplogin.com M1login.net Mywifiext.local Mywifiext.net

All IPs All brands All hosts

Brands

NETGEAR

Web interface

Models on record

Log in to your NETGEAR router

Change the Wi-Fi password on NETGEAR

Change the Wi-Fi name on NETGEAR

Factory reset this NETGEAR

Change the admin password on NETGEAR

If the login page does not open

Unable to access routerlogin.net

Forgot admin password

www.routerlogin.net is not reachable

Login credentials are not accepted

The page loads very slowly or times out

Wrong IP address?

How to reset the router to factory settings