Which address should I use to log in to a D-Link router?

The default login address is 192.168.0.1. Enter it in the address bar of your browser to open the login page. If that does not work, try 192.168.1.1 or 192.168.100.1.

What are the default login credentials for D-Link router?

The most commonly reported default credentials are admin / not. These may have been changed by your ISP or during a previous setup. Check the sticker on the router if they do not work.

What can I do if 192.168.0.1 does not open?

Confirm that your device is connected directly to the router. Check the address for typos. Restart the router and wait about 30 seconds. Disable any VPN or proxy connections. If the problem persists, look up the correct gateway address in the network settings of your device.

How do I find my router's IP address?

On Windows, open Command Prompt and type "ipconfig" — look for "Default Gateway". On macOS, go to System Settings > Network and check the address. On a phone, look in the Wi-Fi network details.

How do I make my router more secure?

Change the default admin password to something unique. Enable WPA3 or WPA2 encryption for Wi-Fi. Disable WPS if you do not use it. Keep the firmware updated. Consider hiding the SSID if you want extra privacy.

I have multiple routers — which one am I logging into?

Make sure you are connected to the specific router you want to configure. Each device on the network may have a different admin address. Check which gateway your device is currently using in the network settings.

Brand

D-Link Router Login

This is a detailed guide for the D-Link router admin panel, typically accessible at 192.168.0.1. Below you will find step-by-step login instructions, default credentials, and configuration tips for Wi-Fi name, password, and troubleshooting. The most common default credentials are admin / not.

D-Link

// router overview

D-Link routers are known for their user-friendly web interface and straightforward setup process. Default login credentials often include the username 'admin' with no password required unless changed by the user.

Manufacturer: D-Link
Device type: router
Common models: DIR-XXX
Firmware: ISP Custom Firmware · North America

D-Link routers stand out for their simplicity and ease of use, with a web interface that is more intuitive compared to some other brands. They often require no default password, making initial setup quicker.

Web interface

// common ip addresses

192.168.0.1PrimaryOn record 192.168.1.1Commonly used as an alternative login IP for D-Link routers.

Models on record

// models

DIR-XXXPopular series known for reliable performance and easy management.

Log in to your D-Link router

// login steps

01
Open the D-Link web interface at 192.168.0.1 or 192.168.1.1.
02
Make sure your device (computer, phone, or tablet) is connected to the router — either via Wi-Fi or with an Ethernet cable plugged directly into the router.
03
Open any web browser and type http://192.168.0.1 into the address bar. Press Enter. If the page does not load, try 192.168.1.1 or 192.168.100.1 instead.
04
Wait for the login page to appear. This may take a few seconds.
05
Enter admin as the username and not as the password. Then click the login button.
06
After logging in, you will see the router dashboard where you can manage all settings.

Change the Wi-Fi password on D-Link

// wifi key

01
Log in to the D-Link Admin Panel using the default gateway address.
02
Go to 'Wireless Settings' > 'Manual Wireless Network Setup'.
03
Scroll down to 'Wireless Security Mode' and select 'WPA-2'.
04
Enter your new WiFi password in the 'Pre Shared Key' field.
05
Click 'Save Settings' to apply the changes.

Change the Wi-Fi name on D-Link

// wifi name

01
Log in to the D-Link Admin Panel using the default gateway address.
02
Navigate to 'Wireless Settings' and click on 'Manual Wireless Network Setup'.
03
Enter your new SSID in the 'Wireless Network Name/SSID' field.
04
Click 'Save Settings' to apply the changes.

Factory reset this D-Link

// factory reset

01
Locate the reset button on the back of your D-Link router.
02
Press and hold the reset button for 10 seconds using a paperclip or similar tool.
03
Wait for the router to reboot and restore factory settings.

Change the admin password on D-Link

// admin password

01
Log in to the D-Link Admin Panel using the default gateway address.
02
Navigate to 'Tools' > 'Admin'.
03
Enter your current password and then your new password in the provided fields.
04
Click 'Save Settings' to apply the changes.

Device information

// device intel

How to change the D-Link WiFi SSID?

To change your D-Link SSID through the Admin Panel of the router, follow these steps:

If the login page does not open

// diagnostics

Having trouble accessing your D-Link router settings? Connection issues, rejected credentials, and slow-loading admin pages are common problems. Below are the most frequent issues and how to fix them quickly.

Frequently asked questions

// faq

Related routers and IP addresses

// related

Pages that share this brand or this address.

IP addresses

192.168.0.1

Brands

Frontier Router Login

Hostnames

Dlinkap.local Login

All IPs All brands All hosts