IP-Portal.org
Brand

Virgin telco Router Login

Virgin Telco devices use a web-based admin panel for configuration. Common default credentials are listed below. This page also includes troubleshooting tips if the login page does not load.

Brands

// brands

top 25 brands

Virgin telco

// router overview

Virgin Telco routers commonly use 192.168.1.1 for admin access, with default credentials like 'user/1234' on some ZTE and Zyxel models. Configuration menus vary by model, with ZTE devices using 'Local Network > WLAN' and Zyxel models using 'Network Settings > Wireless' for Wi-Fi changes.

Manufacturer
Virgin Telco
Device type
router
Common models
ZTE F6640, ZTE H298Q, ZTE F680, Zyxel VMG8924-B10D
Firmware
Virgin Broadband Firmware · UK

Virgin Telco routers differ from other ISPs by using specific ZTE and Zyxel hardware with custom firmware. Unlike generic routers, they often have locked-down features and may not allow full bridge mode without ISP support.

Web interface

// common ip addresses

192.168.1.1PrimaryOn record192.168.0.1Alternative IP for some Virgin Telco models192.168.100.1Less common, but documented for certain firmware versions

Models on record

// models

  • ZTE F6640Uses 'user/user' or 'user/1234' for login
  • ZTE H298QUses 'user/1234' for login
  • ZTE F680Uses 'user/1234' for login
  • Zyxel VMG8924-B10DUses 'user/1234' for login

Log in to your Virgin Telco router

// login steps

  1. 01

    Open the Virgin telco web interface at 192.168.1.1 or 192.168.0.1 or 192.168.100.1.

  2. 02

    Open a browser and type http://192.168.1.1 in the address bar.

  3. 03

    Enter the Username and Password and click Login.

  4. 04

    You will be logged in to the Virgin telco router settings.

Change the Wi-Fi password on Virgin telco

// wifi key

  1. 01

    Access the router admin interface at 192.168.1.1

  2. 02

    Go to 'Local Network > WLAN > WLAN Basic' (ZTE) or 'Network Settings > Wireless > Security' (Zyxel)

  3. 03

    Find the 'WPA Pre-Shared Key' or 'Security Key' field

  4. 04

    Enter your new Wi-Fi password and apply changes

Change the Wi-Fi name on Virgin telco

// wifi name

  1. 01

    Log in to the Virgin Telco router admin page at 192.168.1.1

  2. 02

    Navigate to 'Local Network > WLAN > WLAN Basic' (ZTE) or 'Network Settings > Wireless > General' (Zyxel)

  3. 03

    Locate the 'SSID Name' or 'Wireless Network Name (SSID)' field

  4. 04

    Enter your new Wi-Fi name and save changes

Factory reset this Virgin telco

// factory reset

  1. 01

    Locate the reset button on your Virgin Telco router (usually a small hole)

  2. 02

    Use a paperclip to press and hold the button for 10-15 seconds

  3. 03

    Wait for all lights to blink and the router to reboot

  4. 04

    Router will restore to factory defaults including default credentials

Change the admin password on Virgin telco

// admin password

  1. 01

    Log in to the Virgin Telco router using current credentials

  2. 02

    Navigate to 'System Tools > Password Settings' (ZTE) or 'Maintenance > User Management' (Zyxel)

  3. 03

    Enter current password, then new password twice

  4. 04

    Save changes and note down the new password securely

If the login page does not open

// diagnostics

Having trouble accessing your Virgin Telco router settings? Connection issues, rejected credentials, and slow-loading admin pages are common problems. Below are the most frequent issues and how to fix them quickly.

Frequently asked questions

// faq

Related routers and IP addresses

// related

Pages that share this brand or this address.

IP addresses

192.168.1.1
All IPsAll brandsAll hosts