TPG Modem Login
This page covers how to log in to a TPG modem and configure common settings. The admin panel is usually available at 192.168.1.1. You will find the default login address, common credentials, and instructions for changing Wi-Fi settings.
Brands
// brands
- Vodafone Router Login
- AT&T Mobile Hotspot Login
- AT&T Router Login
- Huawei Router Login
- TP-Link Deco Router Login
- TP-Link Router Login
- NETGEAR Router Login – routerlogin.net
- Verizon Fios Router Login
- Aztech Router Login
- Aztelekom Router Login
- Belkin Router Login
- Converge Router Login
- IndiHome Router Login
- Jazztel Router Login
- Linksys Router Login
- Natcom Router Login
- Orange DarBox Login
- Orange Funbox Login
- Orange Livebox Login
- Orange Router Login
- UZTELECOM Router Login
- ZTE Router Login
- Alcatel-Lucent Router Login
- D-Link Router Login
- TPG Modem Login
top 25 brands
TPG
// router overview
TPG routers and modems are commonly used in Australia, offering a range of models from brands like TP-Link, Sagemcom, Nokia, and Huawei. The default login IP is typically 192.168.1.1, with admin credentials often set to 'admin' for both username and password. Some models, like the Nokia FastMile 5G Modem, use a different IP and username.
- Manufacturer
- TPG
- Device type
- modem
- Common models
- Smart Modem Gateway VX420-G2H, TP-Link VX220-G2V, Sagemcom 5866 5G Modem, Nokia FastMile 5G Modem, Huawei HG532d
- Firmware
- TPG Custom Firmware · Australia
TPG routers often come with ISP-specific firmware tailored for Australian networks, unlike generic routers. Some models, like the Nokia FastMile 5G Modem, use unique IPs and usernames, differing from the standard 192.168.1.1 and 'admin' credentials.
Web interface
// common ip addresses
Models on record
// models
- Smart Modem Gateway VX420-G2HDefault login IP: 192.168.1.1, default password: 'admin'.
- TP-Link VX220-G2VDefault login IP: 192.168.1.1, default password: 'admin'.
- Sagemcom 5866 5G ModemDefault login IP: 192.168.1.1, password printed on modem's barcode sticker.
- Nokia FastMile 5G ModemDefault login IP: 192.168.1.254, username: 'userAdmin', password printed on modem's barcode sticker.
- Huawei HG532dDefault login IP: 192.168.1.1, default username: 'admin', default password: 'admin'.
Log in to your TPG modem
// login steps
- 01
Open the TPG web interface at 192.168.1.1 or 192.168.1.254.
- 02
Make sure your device (computer, phone, or tablet) is connected to the modem — either via Wi-Fi or with an Ethernet cable plugged directly into the modem.
- 03
Open any web browser and type http://192.168.1.1 into the address bar. Press Enter. If the page does not load, try 192.168.0.1 or 192.168.100.1 instead.
- 04
Wait for the login page to appear. This may take a few seconds.
- 05
Enter admin as the username and admin as the password. Then click the login button.
- 06
After logging in, you will see the modem dashboard where you can manage all settings.
Change the Wi-Fi password on TPG
// wifi key
- 01
Log in to the router's web interface using the default IP and credentials.
- 02
Navigate to the 'Wireless' or 'WLAN' section in the menu.
- 03
Locate the 'Security' or 'Password' field.
- 04
Enter the desired Wi-Fi password.
- 05
Save the changes and restart the router if prompted.
Change the Wi-Fi name on TPG
// wifi name
- 01
Log in to the router's web interface using the default IP and credentials.
- 02
Navigate to the 'Wireless' or 'WLAN' section in the menu.
- 03
Locate the 'Network Name (SSID)' or 'SSID' field.
- 04
Enter the desired Wi-Fi name in the SSID field.
- 05
Save the changes and restart the router if prompted.
Factory reset this TPG
// factory reset
- 01
Locate the reset button on the back or bottom of the router.
- 02
Press and hold the reset button for 10-15 seconds using a paperclip or similar tool.
- 03
Wait for the router to reboot and restore factory settings.
- 04
Log in to the router using the default credentials.
Change the admin password on TPG
// admin password
- 01
Log in to the router's web interface using the default IP and credentials.
- 02
Navigate to the 'Administration' or 'System' section in the menu.
- 03
Locate the 'Change Password' option.
- 04
Enter the current password and the new password.
- 05
Save the changes and log in again with the new password.
Device information
// device intel
Device information
Smart Modem Gateway VX420-G2H or TP-Link VX220-G2V, VX420-G2V, VR1600v Modem
If the login page does not open
// diagnostics
Having trouble accessing your TPG modem settings? Connection issues, rejected credentials, and slow-loading admin pages are common problems. Below are the most frequent issues and how to fix them quickly.
Frequently asked questions
// faq
Related routers and IP addresses
// related
Pages that share this brand or this address.
IP addresses

