Which address should I use to log in to a Tm Unifi router?

The default login address is 192.168.0.1. Enter it in the address bar of your browser to open the login page. If that does not work, try 192.168.1.1 or 192.168.100.1.

What are the default login credentials for TM Unifi router?

The most commonly reported default credentials are tmadmin / Adm@xxxx. These may have been changed by your ISP or during a previous setup. Check the sticker on the router if they do not work.

What can I do if 192.168.0.1 does not open?

Confirm that your device is connected directly to the router. Check the address for typos. Restart the router and wait about 30 seconds. Disable any VPN or proxy connections. If the problem persists, look up the correct gateway address in the network settings of your device.

My ISP changed the default credentials — what now?

Many Internet service providers set custom login credentials during installation. Check the documentation your ISP provided, or contact their support. A factory reset will restore manufacturer defaults but may also reset Internet connection settings.

How do I make my router more secure?

Change the default admin password to something unique. Enable WPA3 or WPA2 encryption for Wi-Fi. Disable WPS if you do not use it. Keep the firmware updated. Consider hiding the SSID if you want extra privacy.

Brand

TM Unifi Router Login

Tm Unifi devices use a web-based admin panel for configuration. Common default credentials are listed below. This page also includes troubleshooting tips if the login page does not load.

TM Unifi

// router overview

Tm Unifi routers are commonly used in Malaysia with a straightforward web interface. The default login often uses 'admin' as the username with no password or a default password like 'Adm@xxxx'. The admin panel allows easy Wi-Fi and network configuration.

Manufacturer: Tm Unifi
Device type: router
Common models: Unifi Router, Unifi Pro
Firmware: UnifiOS · Malaysia

Tm Unifi routers are tailored for Malaysian ISPs, with simpler interfaces compared to brands like TP-Link or Asus. Default credentials often follow a predictable pattern, and the admin panel is less complex.

Web interface

// common ip addresses

192.168.0.1PrimaryOn record 192.168.1.1Alternate IP for some models 192.168.100.1Less common, but documented for certain firmware versions

Models on record

// models

Unifi RouterStandard model with dual-band Wi-Fi
Unifi ProHigher-end model with extended coverage

Log in to your Tm Unifi router

// login steps

01
Open the TM Unifi web interface at 192.168.0.1 or 192.168.1.1 or 192.168.100.1.
02
Open a browser and type 192.168.0.1 in the address bar.
03
Enter Username: admin and leave the password blank and click Login.
04
Go to Wireless from the top menu and select SSID and click Edit from SSID Lists.
05
Enter Wi-Fi Network Name in the SSID field.
06
Enter Wi-Fi Password in the Preshared Key field and click Submit.
07
Open a browser and type 192.168.1.1 in the address bar.
08
Enter User Name: tmadmin and Password: Adm@xxxx (xxxx is the last 4 digits of MAC address) and click Login.
09
Select WLAN from the top menu > select wlan0 (2.4GHz) or wlan1 (5GHz) > Basic Settings.
10
Enter Wi-Fi Name in the SSID field and click Apply Changes.
11
Now go to Security and enter Wi-Fi Password in the Pre-Shared Key field and click Apply Changes.
12
Open a browser and type 192.168.0.1 in the address bar.
13
Enter User Name: tmadmin and Password: Adm@xxxx (xxxx is the last four digits of MAC address) and click Login.
14
Go to WLAN > wlan0 (2.4GHz) or wlan1 (5GHz) > Basic Setting.
15
Enter Wi-Fi Password in SSID field and click Apply Changes.
16
Go to Security and enter Wi-Fi Password in the Pre-Shared Key field and click Apply Changes.
17
Open a browser and type 192.168.0.1 in the address bar.
18
Enter User Name: Admin and the User Password is printed on a sticker on the back of the router (E.g: admin@lxvz) and click Log In.
19
Click Settings > Wireless and Enable 2.4GHz/5GHz Wireless Status.
20
Enter Wi-Fi Name (SSID) and Wi-Fi Password and click Save.
21
Open a browser and type 192.168.0.1 in the address bar.
22
Enter Username: admin and Password: adm@xxxx (xxxx refers to last four digits of MAC address).
23
Go to Basic > Wireless > enter Wireless Network Name (SSID) and Password for 2.4GHZ and 5GHz Wireless bands and click Save.

Change the Wi-Fi password on TM Unifi

// wifi key

01
Log in to the Tm Unifi admin panel at 192.168.0.1.
02
Go to 'Wireless' > 'Security'.
03
Locate the 'Pre-Shared Key' or 'Password' field.
04
Enter your new Wi-Fi password.
05
Click 'Save' to apply changes.

Change the Wi-Fi name on TM Unifi

// wifi name

01
Log in to the Tm Unifi admin panel at 192.168.0.1.
02
Navigate to 'Wireless' from the top menu.
03
Select 'SSID' and click 'Edit' from the SSID Lists.
04
Enter your new Wi-Fi name in the 'SSID' field.
05
Click 'Save' to apply changes.

Factory reset this TM Unifi

// factory reset

01
Locate the reset button on the back of the Tm Unifi router.
02
Press and hold the button for 10-15 seconds using a paperclip.
03
Wait for the router to reboot; all lights will blink.
04
The router will restore to factory defaults.

Change the admin password on TM Unifi

// admin password

01
Log in to the Tm Unifi admin panel at 192.168.0.1.
02
Navigate to 'System' or 'Administration'.
03
Select 'Password Settings' or 'Change Password'.
04
Enter the current and new admin password.
05
Click 'Save' or 'Apply' to confirm.

If the login page does not open

// diagnostics

Having trouble accessing your Tm Unifi router settings? Connection issues, rejected credentials, and slow-loading admin pages are common problems. Below are the most frequent issues and how to fix them quickly.

Frequently asked questions

// faq

Related routers and IP addresses

// related

Pages that share this brand or this address.

IP addresses

192.168.0.1

All IPs All brands All hosts

Brands

TM Unifi

Web interface

Models on record

Log in to your Tm Unifi router

Change the Wi-Fi password on TM Unifi

Change the Wi-Fi name on TM Unifi

Factory reset this TM Unifi

Change the admin password on TM Unifi

If the login page does not open

Can't access 192.168.0.1

Wi-Fi not working after changes

192.168.0.1 is not reachable

Login credentials are not accepted

The page loads very slowly or times out

Wrong IP address?

How to reset the router to factory settings