Which address should I use to log in to a Telus router?

The default login address is 192.168.1.254. Enter it in the address bar of your browser to open the login page. If that does not work, try 192.168.1.1 or 192.168.0.1.

What can I do if 192.168.1.254 does not open?

Confirm that your device is connected directly to the router. Check the address for typos. Restart the router and wait about 30 seconds. Disable any VPN or proxy connections. If the problem persists, look up the correct gateway address in the network settings of your device.

How do I reset a Telus router to factory settings?

Press and hold the reset button on the back of the router for at least 10 seconds. The router will restart with factory defaults, including the original login credentials. Note that this will also erase any custom settings.

How do I make my router more secure?

Change the default admin password to something unique. Enable WPA3 or WPA2 encryption for Wi-Fi. Disable WPS if you do not use it. Keep the firmware updated. Consider hiding the SSID if you want extra privacy.

My ISP changed the default credentials — what now?

Many Internet service providers set custom login credentials during installation. Check the documentation your ISP provided, or contact their support. A factory reset will restore manufacturer defaults but may also reset Internet connection settings.

Brand

Telus Router Login

A complete guide to the Telus router admin panel — covering the login page, default credentials, Wi-Fi name and password changes, and what to do if the router page does not open.

Telus

// router overview

Telus routers, such as the Actiontech T3200M and ZyXEL VSG-1432, use specific default credentials for login. The admin password is often found on a sticker on the modem, or defaults to 'telus' for certain models. The web UI is accessible via private IP addresses.

Manufacturer: Telus
Device type: router
Common models: Actiontech T3200M, Actiontech T1200H, Actiontech T2200H, ZyXEL VSG-1432
Firmware: Telus Custom Firmware · Canada

Telus routers often use specific default credentials and IP addresses for login, differing from other brands which may use more generic defaults. The admin password is frequently found on a sticker on the modem, a practice not common across all brands.

Web interface

// common ip addresses

192.168.1.254PrimaryOn record 192.168.1.1Commonly documented alternative IP for Telus routers.

Models on record

// models

Actiontech T3200MDefault username is 'admin', password is on a sticker.
Actiontech T1200HDefault username is 'admin', password is 'telus'.
Actiontech T2200HDefault username is 'admin', password is 'telus'.
ZyXEL VSG-1432Default username is 'admin', password is 'telus'.

Log in to your Telus router

// login steps

01
Open the Telus web interface at 192.168.1.254 or 192.168.1.1.
02
Open a browser and type 192.168.1.254 in the address bar.
03
Enter the Username and Password and click Login. For Telus Wi-Fi Hub and Actiontech T3200M modem: The default Username is “admin” and the Admin Password is printed on a sticker on the back of your modem. For Actiontech (T1200H or T2200H, V1000H or V2000H) and ZyXEL VSG-1432: The default Username is “admin” and the Password is “telus“.
04
You will be logged in to the Telus router settings.

Change the Wi-Fi password on Telus

// wifi key

01
Log in to the Telus admin settings.
02
Go to Wireless Setup > Wireless Settings > Basic Settings.
03
Set Security Key Type to 'Use Custom Passphrase'.
04
Enter the new Wi-Fi Password in the field.
05
Save the changes.

Change the Wi-Fi name on Telus

// wifi name

01
Log in to the Telus admin settings.
02
Navigate to Wireless Setup > Wireless Settings > Basic Settings.
03
Enter the new Wi-Fi Network Name in the SSID Name field.
04
Save the changes.

Factory reset this Telus

// factory reset

01
Locate the reset button on the back of the Telus router.
02
Press and hold the reset button for 10 seconds.
03
Wait for the router to reboot and restore factory settings.

Change the admin password on Telus

// admin password

01
Log in to the Telus admin settings.
02
Navigate to the Administration or Security section.
03
Locate the Password Change option.
04
Enter the current password and the new password.
05
Save the changes.

Device information

// device intel

I can not log in to my Telus router settings

If the GUI access IP is not opening, try to find the IP address of your router.

Due to security reasons, a system administrator may have allocated a different IP address than the one printed on the back of your modem.

A factory reset of your modem will revert back all the modem settings to default values so you can use the credentials printed on the back of your modem.

If the login page does not open

// diagnostics

Having trouble accessing your Telus router settings? Connection issues, rejected credentials, and slow-loading admin pages are common problems. Below are the most frequent issues and how to fix them quickly.

Frequently asked questions

// faq

Related routers and IP addresses

// related

Pages that share this brand or this address.

IP addresses

192.168.1.254

All IPs All brands All hosts