IP-Portal.org
Brand

Telecable Router Login

A complete guide to the Telecable router admin panel — covering the login page, default credentials, Wi-Fi name and password changes, and what to do if the router page does not open.

Brands

// brands

top 25 brands

Telecable

// router overview

Telecable routers often use ZTE and Technicolor hardware with customized firmware. Login typically requires either no credentials or the default admin/tkE*2312 combination. Some models allow blank fields for initial access.

Manufacturer
Telecable
Device type
router
Common models
Cisco EPC3925, ZTE F6640, Technicolor CGA2121
Firmware
Telecable_ZTE_v3.2 · Northern service areas / Telecable_TC_Base · All regions

Unlike generic routers, Telecable devices often have ISP-locked settings for VoIP and IPTV. The admin interface may hide advanced options available on retail versions of the same hardware models.

Web interface

// common ip addresses

192.168.0.1PrimaryOn record192.168.1.1Common alternative for ZTE models

Models on record

// models

  • Cisco EPC3925Blank username/password for initial login
  • ZTE F6640Uses admin/tkE*2312 credentials
  • Technicolor CGA2121Blank credentials accepted

Log in to your Telecable router

// login steps

  1. 01

    Open the Telecable web interface at 192.168.0.1 or 192.168.1.1.

  2. 02

    Open a browser and type http://192.168.0.1 or http://192.168.1.1 in the address bar.

  3. 03

    Enter the Username and Password and click Login.

  4. 04

    You will be logged in to the Telecable router settings.

Change the Wi-Fi password on Telecable

// wifi key

  1. 01

    Access router admin panel using correct IP and credentials

  2. 02

    Go to Wireless Security settings (Cisco) or WLAN Security (ZTE)

  3. 03

    Select WPA2-PSK encryption if available

  4. 04

    Enter new password in 'Pre-Shared Key' field

  5. 05

    Save settings and reconnect devices

Change the Wi-Fi name on Telecable

// wifi name

  1. 01

    Log in to your Telecable router admin interface

  2. 02

    Navigate to: Wireless > Basic Settings (Cisco) or Local Network > WLAN (ZTE)

  3. 03

    Locate 'Wireless Network Name (SSID)' or 'WLAN SSID Configuration' field

  4. 04

    Enter new network name and save changes

Factory reset this Telecable

// factory reset

  1. 01

    Locate recessed reset button on router back panel

  2. 02

    Use paperclip to hold for 15+ seconds until lights blink

  3. 03

    Wait 5 minutes for full reset (Telecable firmware takes longer)

  4. 04

    Reconfigure using original ISP settings

Change the admin password on Telecable

// admin password

  1. 01

    Log in with current credentials

  2. 02

    Locate 'Administration' or 'System Tools' section

  3. 03

    Select 'Password' or 'User Management'

  4. 04

    Enter current password, then new password twice

  5. 05

    Save changes (may require reboot)

If the login page does not open

// diagnostics

Having trouble accessing your Telecable router settings? Connection issues, rejected credentials, and slow-loading admin pages are common problems. Below are the most frequent issues and how to fix them quickly.

Frequently asked questions

// faq

Related routers and IP addresses

// related

Pages that share this brand or this address.

IP addresses

192.168.0.1
All IPsAll brandsAll hosts