Which address should I use to log in to a Teksavvy router?

The default login address is 192.168.1.1. Enter it in the address bar of your browser to open the login page. If that does not work, try 192.168.0.1 or 192.168.100.1.

What are the default login credentials for TekSavvy router?

The most commonly reported default credentials are admin / admin. These may have been changed by your ISP or during a previous setup. Check the sticker on the router if they do not work.

What can I do if 192.168.1.1 does not open?

Confirm that your device is connected directly to the router. Check the address for typos. Restart the router and wait about 30 seconds. Disable any VPN or proxy connections. If the problem persists, look up the correct gateway address in the network settings of your device.

How do I change the Wi-Fi name (SSID)?

In the router admin panel, open the Wi-Fi settings and find the field for the network name (SSID). Enter the new name and save the changes. Your devices will find the network under the new name.

How do I reset a Teksavvy router to factory settings?

Press and hold the reset button on the back of the router for at least 10 seconds. The router will restart with factory defaults, including the original login credentials. Note that this will also erase any custom settings.

Brand

TekSavvy Router Login

Looking for the login page of your TekSavvy router? The most common login address is 192.168.1.1. Some models also respond on 192.168.0.1. This guide walks you through the login, default credentials, and basic Wi-Fi configuration.

TekSavvy

// router overview

Teksavvy routers are known for their straightforward setup and customization options. Default login credentials are often printed on the router itself, ensuring easy access for users.

Manufacturer: Teksavvy
Device type: router
Common models: SmartRG SR515AC/SR516AC, Technicolor CGA4234DGW, CBN CH8568, Hitron CGN3/CGN3U
Firmware: SmartRG Firmware · North America / Technicolor Firmware · North America

Teksavvy routers often use multiple IP addresses for login, depending on the model, which differs from brands that typically use a single default IP. Additionally, default credentials are usually printed on the router, making initial setup more user-friendly.

Web interface

// common ip addresses

192.168.1.1PrimaryOn record 192.168.0.1Commonly used for Hitron and CBN models.192.168.100.1Used for Technicolor models.192.168.1.254Alternative IP for some models.10.0.0.1Less common, but documented for certain Teksavvy routers.

Models on record

// models

SmartRG SR515AC/SR516ACUses 192.168.1.1 for login.
Technicolor CGA4234DGWUses 192.168.100.1 for login.
CBN CH8568Uses 192.168.0.1 for login.
Hitron CGN3/CGN3UUses 192.168.0.1 for login.

Log in to your Teksavvy router

// login steps

01
Open the TekSavvy web interface at 192.168.1.1 or 192.168.0.1 or 192.168.100.1 or 192.168.1.254 or 10.0.0.1.
02
Make sure your device (computer, phone, or tablet) is connected to the router — either via Wi-Fi or with an Ethernet cable plugged directly into the router.
03
Open any web browser and type http://192.168.1.1 into the address bar. Press Enter. If the page does not load, try 192.168.0.1 or 192.168.100.1 instead.
04
Wait for the login page to appear. This may take a few seconds.
05
Enter admin as the username and admin as the password. Then click the login button.
06
After logging in, you will see the router dashboard where you can manage all settings.

Change the Wi-Fi password on TekSavvy

// wifi key

01
Log in to the router using the appropriate IP address.
02
Navigate to the 'Wireless' section.
03
Select 'Security' or 'Basic Settings' depending on the model.
04
Enter the new Wi-Fi Password in the 'Password' field.
05
Click 'Apply/Save' to confirm the changes.

Change the Wi-Fi name on TekSavvy

// wifi name

01
Log in to the router using the appropriate IP address.
02
Navigate to the 'Wireless' section.
03
Select '2.4 GHz Band' or 'Radio' depending on the model.
04
Enter the new Wi-Fi Network Name in the 'SSID' or 'Network Name' field.
05
Click 'Apply/Save' to confirm the changes.

Factory reset this TekSavvy

// factory reset

01
Locate the reset button on the back of the router.
02
Press and hold the reset button for 10 seconds.
03
Wait for the router to reboot and restore factory settings.

Change the admin password on TekSavvy

// admin password

01
Log in to the router using the appropriate IP address.
02
Navigate to the 'Administration' or 'System' section.
03
Select 'Change Password' or 'Admin Password'.
04
Enter the current password and the new password.
05
Click 'Apply/Save' to confirm the changes.

If the login page does not open

// diagnostics

Having trouble accessing your Teksavvy router settings? Connection issues, rejected credentials, and slow-loading admin pages are common problems. Below are the most frequent issues and how to fix them quickly.

Frequently asked questions

// faq

Related routers and IP addresses

// related

Pages that share this brand or this address.

IP addresses

192.168.1.1

All IPs All brands All hosts

Brands

TekSavvy

Web interface

Models on record

Log in to your Teksavvy router

Change the Wi-Fi password on TekSavvy

Change the Wi-Fi name on TekSavvy

Factory reset this TekSavvy

Change the admin password on TekSavvy

If the login page does not open

Cannot Access Router Login Page

Forgot Admin Password

192.168.1.1 is not reachable

Login credentials are not accepted

The page loads very slowly or times out

Wrong IP address?

How to reset the router to factory settings