IP-Portal.org
Brand

Technicolor Router Login

Looking for the login page of your Technicolor router? The most common login address is 192.168.0.1. Some models also respond on 192.168.1.1. This guide walks you through the login, default credentials, and basic Wi-Fi configuration.

Brands

// brands

top 25 brands

Technicolor

// router overview

Technicolor routers are commonly provided by ISPs and feature a straightforward web interface. Default credentials often use 'admin' or the device's serial number. Dual-band models require separate configuration for 2.4GHz and 5GHz networks.

Manufacturer
Technicolor
Device type
router
Common models
TG582n, DWA0120
Firmware
Orange Livebox · Europe / CenturyLink C3000Z · North America

Unlike consumer-focused brands, Technicolor routers often prioritize ISP management features over user customization. The interface tends to be more utilitarian with fewer advanced options exposed by default compared to Netgear or ASUS models.

Web interface

// common ip addresses

192.168.0.1PrimaryOn record192.168.1.1Alternative IP for some Technicolor models192.168.100.1Less common, but documented for certain ISP variants

Models on record

// models

  • TG582nCommon DSL gateway with dual-band Wi-Fi
  • DWA0120ISP-provided Wi-Fi extender

Log in to your Technicolor router

// login steps

  1. 01

    Open the Technicolor web interface at 192.168.0.1 or 192.168.1.1 or 192.168.100.1.

  2. 02

    Make sure your device (computer, phone, or tablet) is connected to the router — either via Wi-Fi or with an Ethernet cable plugged directly into the router.

  3. 03

    Open any web browser and type http://192.168.0.1 into the address bar. Press Enter. If the page does not load, try 192.168.1.1 or 192.168.100.1 instead.

  4. 04

    Wait for the login page to appear. This may take a few seconds.

  5. 05

    Enter admin as the username and admin as the password. Then click the login button.

  6. 06

    After logging in, you will see the router dashboard where you can manage all settings.

Change the Wi-Fi password on Technicolor

// wifi key

  1. 01

    Access the router's admin interface

  2. 02

    Go to 'Wireless Settings' > 'Security'

  3. 03

    Select 'WPA2-PSK' as the security mode (recommended)

  4. 04

    Enter your new password in the 'Pre-Shared Key' field

  5. 05

    Apply changes to both 2.4GHz and 5GHz bands if present

Change the Wi-Fi name on Technicolor

// wifi name

  1. 01

    Log in to the router at 192.168.0.1 using admin credentials

  2. 02

    Navigate to 'Wireless Settings' > 'Basic Settings'

  3. 03

    Locate the 'Network Name (SSID)' field for 2.4GHz or 5GHz

  4. 04

    Enter your new Wi-Fi name and click 'Apply/Save'

Factory reset this Technicolor

// factory reset

  1. 01

    Locate the recessed reset button (usually on back panel)

  2. 02

    Use a paperclip to hold for 10-15 seconds until lights flash

  3. 03

    Wait 5 minutes for full reset (ISP settings may auto-provision)

  4. 04

    Note: This will restore Wi-Fi name/password to sticker defaults

Change the admin password on Technicolor

// admin password

  1. 01

    Log in with default credentials

  2. 02

    Navigate to 'Management' > 'Access Control'

  3. 03

    Select 'Password Settings' (exact menu may vary by model)

  4. 04

    Enter current and new admin passwords

  5. 05

    Save changes (may require router reboot)

If the login page does not open

// diagnostics

Having trouble accessing your Technicolor router settings? Connection issues, rejected credentials, and slow-loading admin pages are common problems. Below are the most frequent issues and how to fix them quickly.

Frequently asked questions

// faq

Related routers and IP addresses

// related

Pages that share this brand or this address.

IP addresses

192.168.0.1
All IPsAll brandsAll hosts