Which address should I use to log in to a Smartfren router?

The default login address is 192.168.1.1. Enter it in the address bar of your browser to open the login page. If that does not work, try 192.168.0.1 or 192.168.100.1.

What are the default login credentials for Smartfren router?

The most commonly reported default credentials are admin / admin. These may have been changed by your ISP or during a previous setup. Check the sticker on the router if they do not work.

What can I do if 192.168.1.1 does not open?

Confirm that your device is connected directly to the router. Check the address for typos. Restart the router and wait about 30 seconds. Disable any VPN or proxy connections. If the problem persists, look up the correct gateway address in the network settings of your device.

How do I change the Wi-Fi password on a Smartfren router?

Log in to the router admin panel, navigate to the Wi-Fi security settings, and enter a new password. Click Save or Apply. All connected devices will need to reconnect with the new password.

How do I change the Wi-Fi name (SSID)?

In the router admin panel, open the Wi-Fi settings and find the field for the network name (SSID). Enter the new name and save the changes. Your devices will find the network under the new name.

Brand

Smartfren Router Login

A complete guide to the Smartfren router admin panel — covering the login page, default credentials, Wi-Fi name and password changes, and what to do if the router page does not open.

Smartfren

// router overview

Smartfren routers and modems are commonly used in Indonesia, with models like the Andromax M2Y MiFi and Huawei E5576. These devices typically use 192.168.1.1 or 192.168.8.1 for admin access, with 'admin' as the default username and password.

Manufacturer: Smartfren
Device type: router
Common models: Andromax M2Y MiFi 4G LTE Modem, Huawei E5576, Prolink PRT701, Advan Router CPE Start
Firmware: Smartfren Custom UI · Indonesia

Smartfren routers often feature localized interfaces (Indonesian language) and may use different default IPs depending on the OEM (e.g., Huawei vs. Prolink models). Unlike global brands, some models lack a default username, requiring only a password.

Web interface

// common ip addresses

192.168.1.1PrimaryOn record 192.168.8.1Used for Huawei-based Smartfren devices

Models on record

// models

Andromax M2Y MiFi 4G LTE ModemUses 192.168.1.1, default credentials: admin/admin
Huawei E5576Uses 192.168.8.1, default password: admin
Prolink PRT701Uses 192.168.1.1, default credentials: admin/password
Advan Router CPE StartUses 192.168.0.1, default username: admin

Log in to your Smartfren router

// login steps

01
Open the Smartfren web interface at 192.168.1.1 or 192.168.8.1.
02
Make sure your device (computer, phone, or tablet) is connected to the router — either via Wi-Fi or with an Ethernet cable plugged directly into the router.
03
Open any web browser and type http://192.168.1.1 into the address bar. Press Enter. If the page does not load, try 192.168.0.1 or 192.168.100.1 instead.
04
Wait for the login page to appear. This may take a few seconds.
05
Enter admin as the username and admin as the password. Then click the login button.
06
After logging in, you will see the router dashboard where you can manage all settings.

Change the Wi-Fi password on Smartfren

// wifi key

01
Log in to the router admin panel.
02
Go to 'WiFi Setting' or 'Pengaturan Keamanan WiFi'.
03
Locate the 'Password' or 'Kata Sandi' field.
04
Enter the new Wi-Fi password.
05
Click 'Save' or 'Simpan' to confirm.

Change the Wi-Fi name on Smartfren

// wifi name

01
Log in to the router admin panel at 192.168.1.1 or 192.168.8.1.
02
Navigate to 'Settings > WiFi Setting' (Andromax) or 'Wi-Fi Pengaturan > Pengaturan SSID' (Huawei).
03
Enter the new Wi-Fi name in the 'Wi-Fi SSID' or 'Nama Jaringan (SSID)' field.
04
Click 'Save' or 'Simpan' to apply changes.

Factory reset this Smartfren

// factory reset

01
Locate the reset button on the back of the router (usually a small hole).
02
Use a paperclip to press and hold the button for 10-15 seconds.
03
Wait for the router to reboot (LEDs will flash).
04
Reconfigure the router using default credentials after reset.

Change the admin password on Smartfren

// admin password

01
Log in to the router admin panel using the current credentials.
02
Navigate to 'System Tools' or 'Pengaturan Sistem'.
03
Select 'Change Password' or 'Ganti Kata Sandi'.
04
Enter the current and new admin passwords.
05
Click 'Apply' or 'Simpan' to update.

Device information

// device intel

Advan Router CPE Start

For dual-band routers, you need to configure 2.4 GHz and 5 GHz networks separately.

If the login page does not open

// diagnostics

Having trouble accessing your Smartfren router settings? Connection issues, rejected credentials, and slow-loading admin pages are common problems. Below are the most frequent issues and how to fix them quickly.

Frequently asked questions

// faq

Related routers and IP addresses

// related

Pages that share this brand or this address.

IP addresses

192.168.1.1 192.168.8.1

All IPs All brands All hosts

Brands

Smartfren

Web interface

Models on record

Log in to your Smartfren router

Change the Wi-Fi password on Smartfren

Change the Wi-Fi name on Smartfren

Factory reset this Smartfren

Change the admin password on Smartfren

Device information

Advan Router CPE Start

If the login page does not open

Cannot access 192.168.1.1

Forgot admin password

192.168.1.1 is not reachable

Login credentials are not accepted

The page loads very slowly or times out

Wrong IP address?

How to reset the router to factory settings