Which address should I use to log in to a PLDT router?

The default login address is 192.168.1.1. Enter it in the address bar of your browser to open the login page. If that does not work, try 192.168.0.1 or 192.168.100.1.

What can I do if 192.168.1.1 does not open?

Confirm that your device is connected directly to the router. Check the address for typos. Restart the router and wait about 30 seconds. Disable any VPN or proxy connections. If the problem persists, look up the correct gateway address in the network settings of your device.

My ISP changed the default credentials — what now?

Many Internet service providers set custom login credentials during installation. Check the documentation your ISP provided, or contact their support. A factory reset will restore manufacturer defaults but may also reset Internet connection settings.

How do I change the Wi-Fi name (SSID)?

In the router admin panel, open the Wi-Fi settings and find the field for the network name (SSID). Enter the new name and save the changes. Your devices will find the network under the new name.

How do I reset a PLDT router to factory settings?

Press and hold the reset button on the back of the router for at least 10 seconds. The router will restart with factory defaults, including the original login credentials. Note that this will also erase any custom settings.

Brand

Smart Bro Router Login

This page covers how to log in to a Smart Bro router and configure common settings. The admin panel is usually available at 192.168.1.1. You will find the default login address, common credentials, and instructions for changing Wi-Fi settings.

Smart Bro

// router overview

PLDT routers are commonly used for Smart Bro Home WiFi and LTE Pocket WiFi services in the Philippines. The web interface provides options to manage WiFi settings, admin access, and perform resets. Default credentials vary by model, but are often found on the device label or in documentation.

Manufacturer: PLDT
Device type: router
Common models: Smart Bro Home WiFi, Smart Bro LTE Pocket WiFi, PLDT Prepaid Home WiFi
Firmware: PLDT Home WiFi · Philippines / Smart Bro LTE · Philippines

PLDT routers often have ISP-specific firmware with locked-down features compared to retail models. The web interface tends to be simpler but may lack advanced networking options found in other brands.

Web interface

// common ip addresses

192.168.1.1PrimaryOn record 192.168.0.1Alternative IP for some PLDT models 192.168.1.254Less common, but documented for certain devices

Models on record

// models

Smart Bro Home WiFiUses default credentials if not changed
Smart Bro LTE Pocket WiFiReset button inside SIM card slot
PLDT Prepaid Home WiFiMay have different default settings

Log in to your PLDT router

// login steps

01
Open the Smart Bro web interface at 192.168.1.1 or 192.168.0.1 or 192.168.1.254.
02
Open a browser and type 192.168.1.1 in the address bar. Google Chrome: If prompted “Your Connection is not private”, click on the ADVANCED button and select Proceed to 192.168.1.1 (unsafe). Microsoft Edge: If promoted “The site is not secure”, click on Details and select Go on to the webpage (not recommended). Mozilla Firefox: If promoted “Warning: Potential Security Risk Ahead”, click Advanced and select Accept the Risk and Continue.
03
Enter the Username and Password and click Log In. Brand NameUsernamePassword Smart Bro Home WiFi smartbrosmartbro Smart Bro LTE Pocket WiFismartbrosmartbro Smart Bro LTE-Advanced Pocket WiFismartltesmartlte PLDT Prepaid Home WiFipldthomepldthome
04
You will be logged in to the Smart Bro Web Dashboard UI.

Change the Wi-Fi password on Smart Bro

// wifi key

01
Log in to the PLDT web dashboard at 192.168.1.1
02
Go to the 'CHANGE NAME AND PASSWORD' tab
03
Enter a new password for the WiFi networks
04
Click 'SAVE' to confirm the new password

Change the Wi-Fi name on Smart Bro

// wifi name

01
Log in to the PLDT web dashboard at 192.168.1.1
02
Navigate to the 'CHANGE NAME AND PASSWORD' tab
03
Enter a new name for the 2.4G and/or 5G network
04
Click 'SAVE' to apply changes

Factory reset this Smart Bro

// factory reset

01
Locate the RESET button (inside SIM slot for Pocket WiFi, or on the side for Home WiFi)
02
Press and hold for 10-15 seconds until LEDs blink
03
Wait for the device to reboot completely
04
Use default credentials to log in after reset

Change the admin password on Smart Bro

// admin password

01
Log in to the PLDT web dashboard using current credentials
02
Locate the 'Admin Settings' or 'Password' section (exact name may vary)
03
Enter the current and new admin passwords
04
Save changes and log in again with the new password

Device information

// device intel

How to reset Smart Bro Pocket WiFi or Home WiFi?

If you forgot your Username or Password for Admin Settings or WiFi Network, you can perform a factory reset to revert to default settings.

If the login page does not open

// diagnostics

Having trouble accessing your PLDT router settings? Connection issues, rejected credentials, and slow-loading admin pages are common problems. Below are the most frequent issues and how to fix them quickly.

Frequently asked questions

// faq

Related routers and IP addresses

// related

Pages that share this brand or this address.

IP addresses

192.168.1.1

Brands

PLDT Router Login

All IPs All brands All hosts