Which address should I use to log in to a Rostelecom router?

The default login address is 192.168.1.1. Enter it in the address bar of your browser to open the login page. If that does not work, try 192.168.0.1 or 192.168.100.1.

What are the default login credentials for Rostelecom router?

The most commonly reported default credentials are admin / admin. These may have been changed by your ISP or during a previous setup. Check the sticker on the router if they do not work.

What can I do if 192.168.1.1 does not open?

Confirm that your device is connected directly to the router. Check the address for typos. Restart the router and wait about 30 seconds. Disable any VPN or proxy connections. If the problem persists, look up the correct gateway address in the network settings of your device.

I have multiple routers — which one am I logging into?

Make sure you are connected to the specific router you want to configure. Each device on the network may have a different admin address. Check which gateway your device is currently using in the network settings.

How do I find my router's IP address?

On Windows, open Command Prompt and type "ipconfig" — look for "Default Gateway". On macOS, go to System Settings > Network and check the address. On a phone, look in the Wi-Fi network details.

Brand

Rostelecom Router Login

Looking for the login page of your Rostelecom router? The most common login address is 192.168.1.1. Some models also respond on 192.168.0.1. This guide walks you through the login, default credentials, and basic Wi-Fi configuration.

Rostelecom

// router overview

Rostelecom routers are commonly used in Russia and CIS countries, offering a straightforward web interface for configuration. Default credentials are often admin/admin, and the login IP is typically 192.168.1.1.

Manufacturer: Rostelecom
Device type: router
Common models: TP-Link TL-WR740N/TL-WR740ND, ZTE ZXHN H298A, Sagemcom F@st 1744
Firmware: Rostelecom Custom Firmware · Russia

Rostelecom routers often come with ISP-specific firmware, optimized for regional network configurations. The web interface is localized in Russian, making it user-friendly for local users.

Web interface

// common ip addresses

192.168.1.1PrimaryOn record 192.168.0.1Alternative login IP for some Rostelecom models.

Models on record

// models

TP-Link TL-WR740N/TL-WR740NDCommonly used Rostelecom router with basic Wi-Fi settings.
ZTE ZXHN H298ARostelecom router with advanced wireless configuration options.
Sagemcom F@st 1744Rostelecom router with a user-friendly interface for Wi-Fi setup.

Log in to your Rostelecom router

// login steps

01
Open the Rostelecom web interface at 192.168.1.1 or 192.168.0.1.
02
Open a browser and type http://192.168.1.1 or http://192.168.0.1 in the address bar.
03
Enter the Username: admin and Password: admin and click Login.
04
You will be logged in to the Rostelecom router settings.

Change the Wi-Fi password on Rostelecom

// wifi key

01
Log in to the router using http://192.168.1.1 or http://192.168.0.1.
02
Navigate to Беспроводной режим > Настройки беспроводного режима (TP-Link) or Локальная сеть > Статус > Беспроводное соединение > Основные параметры WLAN > Настройка WLAN сетей (SSID) (ZTE) or Настройка WLAN > Основной (Sagemcom).
03
Locate the Пароль or WPA Key field.
04
Enter the new Wi-Fi password.
05
Click Сохранить or Применить/Сохранить to save the changes.

Change the Wi-Fi name on Rostelecom

// wifi name

01
Log in to the router using http://192.168.1.1 or http://192.168.0.1.
02
Navigate to Беспроводной режим > Настройки беспроводного режима (TP-Link) or Локальная сеть > Статус > Беспроводное соединение > Основные параметры WLAN > Настройка WLAN сетей (SSID) (ZTE) or Настройка WLAN > Основной (Sagemcom).
03
Enter the new Wi-Fi Network Name in the Имя сети (TP-Link) or Имя WLAN сети (SSID) (ZTE) or SSID (Sagemcom) field.
04
Click Сохранить or Применить/Сохранить to save the changes.

Factory reset this Rostelecom

// factory reset

01
Locate the reset button on the back of the router.
02
Press and hold the reset button for 10 seconds using a paperclip or similar tool.
03
Wait for the router to reboot and restore factory settings.

Change the admin password on Rostelecom

// admin password

01
Log in to the router using http://192.168.1.1 or http://192.168.0.1.
02
Navigate to Система > Пароль администратора (exact menu may vary by model).
03
Enter the current username and password.
04
Enter the new password in the Новый пароль field.
05
Confirm the new password and click Сохранить.

Device information

// device intel

Rotek RX 22200/22300

For dual-band routers, you need to configure 2.4 GHz and 5 GHz networks separately.

If the login page does not open

// diagnostics

Having trouble accessing your Rostelecom router settings? Connection issues, rejected credentials, and slow-loading admin pages are common problems. Below are the most frequent issues and how to fix them quickly.

Frequently asked questions

// faq

Related routers and IP addresses

// related

Pages that share this brand or this address.

IP addresses

192.168.1.1

All IPs All brands All hosts

Brands

Rostelecom

Web interface

Models on record

Log in to your Rostelecom router

Change the Wi-Fi password on Rostelecom

Change the Wi-Fi name on Rostelecom

Factory reset this Rostelecom

Change the admin password on Rostelecom

Device information

Rotek RX 22200/22300

If the login page does not open

Cannot access router login page

Forgot admin password

192.168.1.1 is not reachable

Login credentials are not accepted

The page loads very slowly or times out

Wrong IP address?

How to reset the router to factory settings