Which address should I use to log in to a Quamtum modem?

The default login address is 192.168.1.254. Enter it in the address bar of your browser to open the login page. If that does not work, try 192.168.1.1 or 192.168.0.1.

What can I do if 192.168.1.254 does not open?

Confirm that your device is connected directly to the modem. Check the address for typos. Restart the modem and wait about 30 seconds. Disable any VPN or proxy connections. If the problem persists, look up the correct gateway address in the network settings of your device.

How do I change the Wi-Fi name (SSID)?

In the modem admin panel, open the Wi-Fi settings and find the field for the network name (SSID). Enter the new name and save the changes. Your devices will find the network under the new name.

My ISP changed the default credentials — what now?

Many Internet service providers set custom login credentials during installation. Check the documentation your ISP provided, or contact their support. A factory reset will restore manufacturer defaults but may also reset Internet connection settings.

How do I find my modem's IP address?

On Windows, open Command Prompt and type "ipconfig" — look for "Default Gateway". On macOS, go to System Settings > Network and check the address. On a phone, look in the Wi-Fi network details.

Brand

Quamtum Modem Login

A complete guide to the Quamtum modem admin panel — covering the login page, default credentials, Wi-Fi name and password changes, and what to do if the modem page does not open.

Quamtum

// router overview

Quamtum routers offer a straightforward web interface for managing network settings. Some models require specific credentials tied to the device's IMEI, ensuring enhanced security.

Manufacturer: Quamtum
Device type: modem
Common models: HotSpot HS1, Quamtum Connect 1 (Telcel), Access Q3, Access Q6
Firmware: Telcel Firmware · Mexico

Quamtum routers often require credentials tied to the device's IMEI, providing an additional layer of security compared to other brands that use generic default credentials.

Web interface

// common ip addresses

192.168.1.254PrimaryOn record 192.168.8.1Commonly used for Quamtum Connect 1 (Telcel) models

Models on record

// models

HotSpot HS1Default credentials: Usuario: admin, Contraseña: admin
Quamtum Connect 1 (Telcel)Credentials tied to IMEI: Usuario: Telcel_Admin, Contraseña: Telcelxxxx
Access Q3Default credentials: Nombre Usuario: admin, Contraseña: admin
Access Q6Default credentials: Usuario: admin, Contraseña: admin

Log in to your Quamtum modem

// login steps

01
Open the Quamtum web interface at 192.168.1.254 or 192.168.8.1.
02
Make sure your device (computer, phone, or tablet) is connected to the modem — either via Wi-Fi or with an Ethernet cable plugged directly into the modem.
03
Open any web browser and type http://192.168.1.254 into the address bar. Press Enter. If the page does not load, try 192.168.1.1 or 192.168.0.1 instead.
04
Wait for the login page to appear. This may take a few seconds.
05
Enter the login credentials. If you have never changed them, check the sticker on the back of the modem or the documentation from your Internet provider.
06
After logging in, you will see the modem dashboard where you can manage all settings.

Change the Wi-Fi password on Quamtum

// wifi key

01
Log in to the Quamtum web interface.
02
Navigate to 'Configuración de red' > 'Configuración de Wi-Fi'.
03
Locate the 'Contraseña de red' field.
04
Enter the new Wi-Fi password.
05
Save the changes and restart the router if prompted.

Change the Wi-Fi name on Quamtum

// wifi name

01
Log in to the Quamtum web interface.
02
Navigate to 'Configuración de red' > 'Configuración de Wi-Fi'.
03
Enter the new Wi-Fi Network Name in the 'Nombre de red (SSID)' field.
04
Save the changes and restart the router if prompted.

Factory reset this Quamtum

// factory reset

01
Locate the reset button on the back of the Quamtum router.
02
Press and hold the reset button for 10 seconds using a paperclip.
03
Wait for the router to reboot and restore factory settings.
04
Reconfigure the router using the default credentials.

Change the admin password on Quamtum

// admin password

01
Log in to the Quamtum web interface.
02
Navigate to 'Configuración del sistema' > 'Cambiar contraseña'.
03
Enter the current admin password.
04
Enter the new admin password and confirm it.
05
Save the changes and log in again with the new password.

If the login page does not open

// diagnostics

Having trouble accessing your Quamtum modem settings? Connection issues, rejected credentials, and slow-loading admin pages are common problems. Below are the most frequent issues and how to fix them quickly.

Frequently asked questions

// faq

Related routers and IP addresses

// related

Pages that share this brand or this address.

IP addresses

192.168.1.254 192.168.8.1

All IPs All brands All hosts

Brands

Quamtum

Web interface

Models on record

Log in to your Quamtum modem

Change the Wi-Fi password on Quamtum

Change the Wi-Fi name on Quamtum

Factory reset this Quamtum

Change the admin password on Quamtum

If the login page does not open

Cannot access web interface

Forgot admin password

192.168.1.254 is not reachable

Login credentials are not accepted

The page loads very slowly or times out

Wrong IP address?

How to reset the modem to factory settings