Which address should I use to log in to a Oxio router?

The default login address is 192.168.1.1. Enter it in the address bar of your browser to open the login page. If that does not work, try 192.168.0.1 or 192.168.100.1.

What are the default login credentials for oxio router?

The most commonly reported default credentials are oxio / FL54cBHZs6. These may have been changed by your ISP or during a previous setup. Check the sticker on the router if they do not work.

What can I do if 192.168.1.1 does not open?

Confirm that your device is connected directly to the router. Check the address for typos. Restart the router and wait about 30 seconds. Disable any VPN or proxy connections. If the problem persists, look up the correct gateway address in the network settings of your device.

My ISP changed the default credentials — what now?

Many Internet service providers set custom login credentials during installation. Check the documentation your ISP provided, or contact their support. A factory reset will restore manufacturer defaults but may also reset Internet connection settings.

How do I make my router more secure?

Change the default admin password to something unique. Enable WPA3 or WPA2 encryption for Wi-Fi. Disable WPS if you do not use it. Keep the firmware updated. Consider hiding the SSID if you want extra privacy.

Brand

oxio Router Login

Need to configure your oxio router? You can access the router settings by entering 192.168.1.1 in a browser. This guide covers the login process, default username and password, and how to update the Wi-Fi name and password.

oxio

// router overview

Oxio routers, including SmartRG models, offer a straightforward web interface for configuration. Login requires specific credentials, with some models needing custom details from customer support. The interface varies slightly between older and newer firmware versions.

Manufacturer: Oxio
Device type: router
Common models: SmartRG SR400ac, SmartRG SR905acv, SmartRG SR516, SmartRG SR616
Firmware: SmartRG Generic · North America / Oxio Custom · Canada

Unlike many ISPs, Oxio uses different credential systems across models - some use fixed defaults while others require custom credentials. The web interface maintains SmartRG's structure but with Oxio-specific branding and security enhancements.

Web interface

// common ip addresses

192.168.1.1PrimaryOn record 192.168.0.1Alternative IP for some Oxio routers 192.168.1.254Less common, but documented for certain setups

Models on record

// models

SmartRG SR400acUses oxio/FL54cBHZs6 or user/oxio for older firmware
SmartRG SR905acvUses oxio/FL54cBHZs6 or user/oxio for older firmware
SmartRG SR516Requires custom credentials from Oxio support
SmartRG SR616Requires custom credentials from Oxio support

Log in to your Oxio router

// login steps

01
Open the oxio web interface at 192.168.1.1 or 192.168.0.1 or 192.168.1.254.
02
Make sure your device (computer, phone, or tablet) is connected to the router — either via Wi-Fi or with an Ethernet cable plugged directly into the router.
03
Open any web browser and type http://192.168.1.1 into the address bar. Press Enter. If the page does not load, try 192.168.0.1 or 192.168.100.1 instead.
04
Wait for the login page to appear. This may take a few seconds.
05
Enter oxio as the username and FL54cBHZs6 as the password. Then click the login button.
06
After logging in, you will see the router dashboard where you can manage all settings.

Change the Wi-Fi password on oxio

// wifi key

01
Log in to the Oxio router web interface
02
Go to 'WiFi > Security' or 'Wireless > Security Settings'
03
Locate the 'Pre-Shared Key' or 'WPA Password' field
04
Enter your new Wi-Fi password
05
Save changes and reconnect devices

Change the Wi-Fi name on oxio

// wifi name

01
Log in to the Oxio router web interface at 192.168.1.1
02
Navigate to 'WiFi > Networks' (SmartRG SR400ac/SR905acv) or 'Wireless > 2.4 GHz Band > Basic' (SmartRG SR516/SR616)
03
Enter the new Wi-Fi Network Name in the SSID field
04
Click 'Apply' or 'Save' to confirm changes

Factory reset this oxio

// factory reset

01
Locate the reset button (usually on the back of the router)
02
Use a paperclip to press and hold for 10-15 seconds
03
Wait for all lights to blink simultaneously
04
Release and wait 2-3 minutes for reboot
05
Note: This will restore factory defaults including custom Wi-Fi names

Change the admin password on oxio

// admin password

01
Log in to the router with current admin credentials
02
Navigate to 'Administration' or 'System Tools'
03
Select 'Password Settings' or 'Change Password'
04
Enter current password, then new password twice
05
Save changes (may require reboot)

Device information

// device intel

eero 6

Note: Eero routers currently do not support a web interface. To change any default settings, you need to install the Eero mobile app on Android or iOS.

If the login page does not open

// diagnostics

Having trouble accessing your Oxio router settings? Connection issues, rejected credentials, and slow-loading admin pages are common problems. Below are the most frequent issues and how to fix them quickly.

Frequently asked questions

// faq

Related routers and IP addresses

// related

Pages that share this brand or this address.

IP addresses

192.168.1.1

All IPs All brands All hosts

Brands

oxio

Web interface

Models on record

Log in to your Oxio router

Change the Wi-Fi password on oxio

Change the Wi-Fi name on oxio

Factory reset this oxio

Change the admin password on oxio

Device information

eero 6

If the login page does not open

Can't access 192.168.1.1

Login credentials not working

192.168.1.1 is not reachable

Login credentials are not accepted

The page loads very slowly or times out

Wrong IP address?

How to reset the router to factory settings