Which address should I use to log in to a Myrepublic router?

The default login address is 192.168.100.1. Enter it in the address bar of your browser to open the login page. If that does not work, try 192.168.1.1 or 192.168.0.1.

What are the default login credentials for MyRepublic router?

The most commonly reported default credentials are root / admin. These may have been changed by your ISP or during a previous setup. Check the sticker on the router if they do not work.

What can I do if 192.168.100.1 does not open?

Confirm that your device is connected directly to the router. Check the address for typos. Restart the router and wait about 30 seconds. Disable any VPN or proxy connections. If the problem persists, look up the correct gateway address in the network settings of your device.

How do I change the Wi-Fi password on a Myrepublic router?

Log in to the router admin panel, navigate to the Wi-Fi security settings, and enter a new password. Click Save or Apply. All connected devices will need to reconnect with the new password.

How do I find my router's IP address?

On Windows, open Command Prompt and type "ipconfig" — look for "Default Gateway". On macOS, go to System Settings > Network and check the address. On a phone, look in the Wi-Fi network details.

Brand

MyRepublic Router Login

This page covers how to log in to a MyRepublic router and configure common settings. The admin panel is usually available at 192.168.100.1. You will find the default login address, common credentials, and instructions for changing Wi-Fi settings.

MyRepublic

// router overview

Myrepublic routers are commonly used for fiber internet setups, offering a range of models from various manufacturers. They provide a straightforward web interface for managing network settings.

Manufacturer: Myrepublic
Device type: router
Common models: Huawei HG8245, FiberHome, Technicolor TG389ac, ZTE ZXHN F609 Fiberstar, DASAN
Firmware: Myrepublic Custom Firmware · Asia

Myrepublic routers are tailored for fiber internet users, offering specific configurations and firmware optimizations not commonly found in generic routers.

Web interface

// common ip addresses

192.168.100.1PrimaryOn record 192.168.1.1Commonly used IP for Myrepublic routers

Models on record

// models

Huawei HG8245Supports fiber internet with advanced WLAN configuration
FiberHomeBasic fiber router with straightforward WLAN settings
Technicolor TG389acDual-band router with advanced wireless settings
ZTE ZXHN F609 FiberstarFiber router with simple WLAN management
DASANRouter with detailed WiFi setup options

Log in to your Myrepublic router

// login steps

01
Open the MyRepublic web interface at 192.168.100.1 or 192.168.1.1.
02
Make sure your device (computer, phone, or tablet) is connected to the router — either via Wi-Fi or with an Ethernet cable plugged directly into the router.
03
Open any web browser and type http://192.168.100.1 into the address bar. Press Enter. If the page does not load, try 192.168.1.1 or 192.168.0.1 instead.
04
Wait for the login page to appear. This may take a few seconds.
05
Enter root as the username and admin as the password. Then click the login button.
06
After logging in, you will see the router dashboard where you can manage all settings.

Change the Wi-Fi password on MyRepublic

// wifi key

01
Log in to the Myrepublic router web interface.
02
Go to WLAN > WLAN Configuration.
03
Enter the new Wi-Fi password in the Password field.
04
Save the changes and restart the router if necessary.

Change the Wi-Fi name on MyRepublic

// wifi name

01
Log in to the Myrepublic router web interface.
02
Navigate to WLAN > WLAN Configuration.
03
Enter the new Wi-Fi Network Name in the SSID Name field.
04
Save the changes and restart the router if necessary.

Factory reset this MyRepublic

// factory reset

01
Log in to the Myrepublic router web interface.
02
Go to System Tools > Factory Default.
03
Click on the 'Restore Factory Default' button.
04
Confirm the reset and wait for the router to reboot.

Change the admin password on MyRepublic

// admin password

01
Log in to the Myrepublic router web interface.
02
Navigate to System Tools > Password.
03
Enter the current admin username and password.
04
Enter the new admin password and confirm it.
05
Save the changes and log in again with the new password.

If the login page does not open

// diagnostics

Having trouble accessing your Myrepublic router settings? Connection issues, rejected credentials, and slow-loading admin pages are common problems. Below are the most frequent issues and how to fix them quickly.

Frequently asked questions

// faq

Related routers and IP addresses

// related

Pages that share this brand or this address.

IP addresses

192.168.5.1 192.168.55.1 192.168.100.1

All IPs All brands All hosts

Brands

MyRepublic

Web interface

Models on record

Log in to your Myrepublic router

Change the Wi-Fi password on MyRepublic

Change the Wi-Fi name on MyRepublic

Factory reset this MyRepublic

Change the admin password on MyRepublic

If the login page does not open

Cannot access router web interface

Wi-Fi not working

192.168.100.1 is not reachable

Login credentials are not accepted

The page loads very slowly or times out

Wrong IP address?

How to reset the router to factory settings