IP-Portal.org
Brand

Mobily Router Login

This page covers how to log in to a Mobily router and configure common settings. The admin panel is usually available at 192.168.100.1. You will find the default login address, common credentials, and instructions for changing Wi-Fi settings.

Brands

// brands

top 25 brands

Mobily

// router overview

Mobily routers are primarily used in Saudi Arabia for fiber, 4G, and 5G connections. Default credentials vary by model, with Huawei and Zhone devices using telecomadmin/admintelecom or user/user. Some models allow blank password fields for initial login.

Manufacturer
Mobily
Device type
router
Common models
Mobily Fiber Router (Huawei), ZHONE eLife Router, Mobily Connect 4G Router, D-Link 5G Router
Firmware
Huawei HG8245H · Saudi Arabia

Unlike STC routers, Mobily devices often use telecomadmin credentials for fiber models. Their 4G routers uniquely accept blank passwords during initial setup, while competitors require at least 'admin'.

Web interface

// common ip addresses

192.168.100.1PrimaryOn record192.168.1.1Used by Zhone and D-Link models192.168.2.1Alternative for some 4G routers

Models on record

// models

  • Mobily Fiber Router (Huawei)Uses telecomadmin credentials
  • ZHONE eLife RouterUser/user credentials, dual-band settings
  • Mobily Connect 4G RouterAdmin/admin or blank password
  • D-Link 5G RouterAdmin password only

Log in to your Mobily router

// login steps

  1. 01

    Open the Mobily web interface at 192.168.100.1 or 192.168.1.1 or 192.168.2.1.

  2. 02

    Make sure your device (computer, phone, or tablet) is connected to the router — either via Wi-Fi or with an Ethernet cable plugged directly into the router.

  3. 03

    Open any web browser and type http://192.168.100.1 into the address bar. Press Enter. If the page does not load, try 192.168.1.1 or 192.168.0.1 instead.

  4. 04

    Wait for the login page to appear. This may take a few seconds.

  5. 05

    Enter telecomadmin as the username and admintelecom as the password. Then click the login button.

  6. 06

    After logging in, you will see the router dashboard where you can manage all settings.

Change the Wi-Fi password on Mobily

// wifi key

  1. 01

    After changing SSID, find the WPA Pre-Shared Key or similar field

  2. 02

    Enter your new password (8-63 characters)

  3. 03

    Select WPA2-PSK encryption if available

  4. 04

    Save changes and reconnect devices

Change the Wi-Fi name on Mobily

// wifi name

  1. 01

    Log in and navigate to WLAN > Basic Network Settings (Huawei) or Wireless > 2.4GHz/5GHz (other models)

  2. 02

    Locate the SSID Name or Wi-Fi Name(SSID) field

  3. 03

    Enter your new network name

  4. 04

    Click Apply/Save or Apply Changes

Factory reset this Mobily

// factory reset

  1. 01

    Locate recessed reset button (usually on back)

  2. 02

    Use a paperclip to hold for 10-15 seconds until lights blink

  3. 03

    Wait 5 minutes for full reboot

  4. 04

    Note: This restores Wi-Fi name/password to sticker defaults

Change the admin password on Mobily

// admin password

  1. 01

    Go to Maintenance or System Tools section

  2. 02

    Look for 'Change Password' or 'Admin Settings'

  3. 03

    Enter current credentials when prompted

  4. 04

    Set new password (some models require special characters)

  5. 05

    Confirm and save (may force logout)

Device information

// device intel

D-Link 5G Router

To use a single wireless network, enable the Smart Connection feature. You can disable the option to configure 2.4 GHz and 5GHz networks separately.

If the login page does not open

// diagnostics

Having trouble accessing your Mobily router settings? Connection issues, rejected credentials, and slow-loading admin pages are common problems. Below are the most frequent issues and how to fix them quickly.

Frequently asked questions

// faq

Related routers and IP addresses

// related

Pages that share this brand or this address.

IP addresses

192.168.100.1
All IPsAll brandsAll hosts