IP-Portal.org
Brand

MetroFibre Router Login

Need to configure your MetroFibre router? You can access the router settings by entering 192.168.1.1 in a browser. This guide covers the login process, default username and password, and how to update the Wi-Fi name and password.

Brands

// brands

top 25 brands

MetroFibre

// router overview

Metrofibre routers often use Calix or Nokia hardware with customized firmware. Login IPs vary by model, with 192.168.1.1 and 192.168.1.254 being common. Admin interfaces follow vendor layouts but may have Metrofibre-specific branding.

Manufacturer
Metrofibre
Device type
router
Common models
Calix, Nokia Beacon 2, Nokia G-140W/G-2425G
Firmware
Calix E7-2 · South Africa / Nokia ISAM · Multiple

Unlike consumer routers, Metrofibre devices often use ISP-provisioned hardware with customized interfaces. Settings may be locked down compared to retail models, requiring support contact for certain changes.

Web interface

// common ip addresses

192.168.1.1PrimaryOn record192.168.1.254Used by Nokia G-140W/G-2425G series192.168.18.1Nokia Beacon 2 routers only

Models on record

// models

  • CalixUses admin as default username
  • Nokia Beacon 2Web interface at webgui.nokiawifi.com
  • Nokia G-140W/G-2425GUses userAdmin as default username

Log in to your Metrofibre router

// login steps

  1. 01

    Open the MetroFibre web interface at 192.168.1.1 or 192.168.1.254 or 192.168.18.1.

  2. 02

    Open a browser and type http://192.168.1.1 or http://192.168.1.254 in the address bar.

  3. 03

    Enter the Username and Password and click Login.

  4. 04

    You will be logged in to the MetroFibre router settings.

Change the Wi-Fi password on MetroFibre

// wifi key

  1. 01

    Access the Wireless Security settings under your router's WiFi configuration

  2. 02

    Select WPA2-PSK (AES) as encryption type for best security

  3. 03

    Enter new password in the Pre-Shared Key field

  4. 04

    Apply changes and reconnect devices using the new credentials

Change the Wi-Fi name on MetroFibre

// wifi name

  1. 01

    Log in to your Metrofibre router admin panel

  2. 02

    Navigate to Wireless > 2.4G Network > SSID Setup (Calix) or Network > Wireless (Nokia)

  3. 03

    Enter new Wi-Fi name in the SSID Name or Rename SSID field

  4. 04

    Click Apply/Save to confirm changes

Factory reset this MetroFibre

// factory reset

  1. 01

    Locate recessed reset button (usually on back panel)

  2. 02

    Press and hold for 10-15 seconds using a paperclip

  3. 03

    Wait for all lights to blink simultaneously

  4. 04

    Router will reboot with factory defaults

Change the admin password on MetroFibre

// admin password

  1. 01

    Locate the System Tools or Administration section

  2. 02

    Select Password Settings or similar (exact menu varies by model)

  3. 03

    Enter current credentials when prompted

  4. 04

    Set and confirm new admin password

  5. 05

    Note: Metrofibre does not publish default passwords - contact support if locked out

Device information

// device intel

Alcatel-Lucent I-240W-A

For dual-band routers, you need to configure 2.4GHz and 5GHz networks separately.

If the login page does not open

// diagnostics

Having trouble accessing your Metrofibre router settings? Connection issues, rejected credentials, and slow-loading admin pages are common problems. Below are the most frequent issues and how to fix them quickly.

Frequently asked questions

// faq

Related routers and IP addresses

// related

Pages that share this brand or this address.

All IPsAll brandsAll hosts