IP-Portal.org
Brand

MásMóvil Router Login

A complete guide to the MásMóvil router admin panel — covering the login page, default credentials, Wi-Fi name and password changes, and what to do if the router page does not open.

MásMóvil

// router overview

Masmovil routers are typically rebranded devices from manufacturers like ZTE, Huawei, Sagemcom, and NuCom. The admin interface is accessed via a private IP address, and settings vary slightly depending on the underlying hardware.

Manufacturer
Masmovil
Device type
router
Common models
ZTE, Huawei, Sagemcom, NuCom
Firmware
Masmovil Custom · Spain

Masmovil routers differ from other ISPs primarily in their use of rebranded hardware from multiple manufacturers, leading to varied interfaces. Unlike ISPs that standardize on one manufacturer, Masmovil's approach means users must identify their underlying hardware model for accurate configuration steps.

Web interface

// common ip addresses

Models on record

// models

  • ZTECommonly used by Masmovil, interface follows ZTE's layout
  • HuaweiSome models use Huawei firmware with Masmovil branding
  • SagemcomFound in certain regions, follows Sagemcom's UI structure
  • NuComLess common, uses NuCom's configuration menus

Log in to your Masmovil router

// login steps

  1. 01

    Open the MásMóvil web interface at 192.168.1.1 or 192.168.0.1 or 192.168.1.254.

  2. 02

    Open a browser and type http://192.168.1.1 in the address bar.

  3. 03

    Enter the Username and Password and click Login.

  4. 04

    You will be logged in to the MásMóvil router settings.

Change the Wi-Fi password on MásMóvil

// wifi key

  1. 01

    Log in to the router settings at 192.168.1.1.

  2. 02

    For ZTE models: Go to Network > WLAN Radio2.4G(Online) > Security.

  3. 03

    For Huawei models: Under 'Set Up WLAN', enter the new password in the 'Password' field.

  4. 04

    For Sagemcom models: In 'Wi-Fi 2.4GHz > Basic', update the 'Password' and 'Confirm Password' fields.

  5. 05

    For NuCom models: Navigate to 'Basic Setup > Wireless > Security Setting' and enter the new password.

  6. 06

    Save the changes by clicking 'Submit' or 'Apply'.

Change the Wi-Fi name on MásMóvil

// wifi name

  1. 01

    Log in to the router settings at 192.168.1.1.

  2. 02

    For ZTE models: Navigate to Network > WLAN Radio2.4G(Online) > SSID Settings.

  3. 03

    For Huawei models: Select 'Set Up WLAN' and locate the 'WLAN 2.4 GHz SSID' field.

  4. 04

    For Sagemcom models: From the home screen, select 'Wi-Fi 2.4GHz > Basic' and edit the 'SSID' field.

  5. 05

    For NuCom models: Go to 'Basic Setup > Wireless > Basic Configuration 2.4GHz' and update the 'SSID' field.

  6. 06

    Click 'Submit' or 'Apply' to save changes.

Factory reset this MásMóvil

// factory reset

  1. 01

    Locate the reset button on the back of the router (usually a small hole).

  2. 02

    Use a paperclip to press and hold the button for 10-15 seconds.

  3. 03

    Wait for the router to reboot (all lights will flash and stabilize).

  4. 04

    Note: This will restore all settings to factory defaults, including Wi-Fi credentials.

Change the admin password on MásMóvil

// admin password

  1. 01

    Log in to the router settings using the current admin credentials.

  2. 02

    Navigate to 'System' or 'Administration' (exact label varies by model).

  3. 03

    Look for 'Change Password' or 'Admin Password' option.

  4. 04

    Enter the current password, then the new password twice.

  5. 05

    Save the changes. Note: Some models may not allow changing the admin password.

If the login page does not open

// diagnostics

Having trouble accessing your Masmovil router settings? Connection issues, rejected credentials, and slow-loading admin pages are common problems. Below are the most frequent issues and how to fix them quickly.

Frequently asked questions

// faq

Related routers and IP addresses

// related

Pages that share this brand or this address.

IP addresses