Which address should I use to log in to a Lifecell router?

The default login address is 192.168.0.1. Enter it in the address bar of your browser to open the login page. If that does not work, try 192.168.1.1 or 192.168.100.1.

What are the default login credentials for lifecell router?

The most commonly reported default credentials are admin / admin. These may have been changed by your ISP or during a previous setup. Check the sticker on the router if they do not work.

What can I do if 192.168.0.1 does not open?

Confirm that your device is connected directly to the router. Check the address for typos. Restart the router and wait about 30 seconds. Disable any VPN or proxy connections. If the problem persists, look up the correct gateway address in the network settings of your device.

How do I find my router's IP address?

On Windows, open Command Prompt and type "ipconfig" — look for "Default Gateway". On macOS, go to System Settings > Network and check the address. On a phone, look in the Wi-Fi network details.

I have multiple routers — which one am I logging into?

Make sure you are connected to the specific router you want to configure. Each device on the network may have a different admin address. Check which gateway your device is currently using in the network settings.

Brand

lifecell Router Login

Need to configure your lifecell router? You can access the router settings by entering 192.168.0.1 in a browser. This guide covers the login process, default username and password, and how to update the Wi-Fi name and password.

lifecell

// router overview

Lifecell routers are commonly used in Ukraine, offering straightforward web interfaces for configuration. Default credentials are often 'admin' for both username and password, but some models require a password set during initial setup.

Manufacturer: Lifecell
Device type: router
Common models: TP-Link Archer C24, Huawei B311-221, ZTE MF79U, Alcatel LinkKey IK41
Firmware: Lifecell Custom Firmware · Ukraine

Lifecell routers are tailored for the Ukrainian market, with localized web interfaces and firmware optimized for Lifecell's network. Unlike some brands, Lifecell routers often use 'admin' as both the default username and password, simplifying initial setup.

Web interface

// common ip addresses

192.168.0.1PrimaryOn record 192.168.8.1Used for Huawei B311-221 model 192.168.1.1Used for Alcatel LinkKey IK41 model

Models on record

// models

TP-Link Archer C24Uses 192.168.0.1, default credentials 'admin/admin'
Huawei B311-221Uses 192.168.8.1, default password 'admin'
ZTE MF79UUses 192.168.0.1, default password 'admin'
Alcatel LinkKey IK41Uses 192.168.1.1, default password 'admin'

Log in to your Lifecell router

// login steps

01
Open the lifecell web interface at 192.168.0.1 or 192.168.8.1 or 192.168.1.1.
02
Make sure your device (computer, phone, or tablet) is connected to the router — either via Wi-Fi or with an Ethernet cable plugged directly into the router.
03
Open any web browser and type http://192.168.0.1 into the address bar. Press Enter. If the page does not load, try 192.168.1.1 or 192.168.100.1 instead.
04
Wait for the login page to appear. This may take a few seconds.
05
Enter admin as the username and admin as the password. Then click the login button.
06
After logging in, you will see the router dashboard where you can manage all settings.

Change the Wi-Fi password on lifecell

// wifi key

01
Log in to the router's web interface using the appropriate IP address.
02
Navigate to the 'Беспроводной режим' (Wireless Mode) or 'Налаштування Wi-Fi' (Wi-Fi Settings) section.
03
Locate the 'Пароль Wi-Fi' (Wi-Fi Password) field.
04
Enter the new Wi-Fi password and save the changes.

Change the Wi-Fi name on lifecell

// wifi name

01
Log in to the router's web interface using the appropriate IP address.
02
Navigate to the 'Беспроводной режим' (Wireless Mode) or 'Налаштування Wi-Fi' (Wi-Fi Settings) section.
03
Enter the desired Wi-Fi Network Name in the 'Имя сети (SSID)' or 'Імʼя Wi-Fi' field.
04
Save the changes and wait for the router to apply the new settings.

Factory reset this lifecell

// factory reset

01
Log in to the router's web interface using the appropriate IP address.
02
Navigate to the 'Система' (System) or 'Администрирование' (Administration) section.
03
Locate the 'Сброс настроек' (Reset Settings) option.
04
Confirm the reset and wait for the router to reboot.

Change the admin password on lifecell

// admin password

01
Log in to the router's web interface using the appropriate IP address.
02
Navigate to the 'Система' (System) or 'Администрирование' (Administration) section.
03
Locate the 'Изменить пароль администратора' (Change Admin Password) option.
04
Enter the current password and the new password, then confirm the changes.

Device information

// device intel

Tecno TR118

For dual-band routers, you need to configure 2.4 GHz and 5 GHz networks separately.

If the login page does not open

// diagnostics

Having trouble accessing your Lifecell router settings? Connection issues, rejected credentials, and slow-loading admin pages are common problems. Below are the most frequent issues and how to fix them quickly.

Frequently asked questions

// faq

Related routers and IP addresses

// related

Pages that share this brand or this address.

IP addresses

192.168.0.1 192.168.8.1

All IPs All brands All hosts

Brands

lifecell

Web interface

Models on record

Log in to your Lifecell router

Change the Wi-Fi password on lifecell

Change the Wi-Fi name on lifecell

Factory reset this lifecell

Change the admin password on lifecell

Device information

Tecno TR118

If the login page does not open

Cannot access the web interface

Wi-Fi network not visible

192.168.0.1 is not reachable

Login credentials are not accepted

The page loads very slowly or times out

Wrong IP address?

How to reset the router to factory settings