iiNet Modem Login
Looking for the login page of your iiNet modem? The most common login address is 10.1.1.1. Some models also respond on 192.168.1.1. This guide walks you through the login, default credentials, and basic Wi-Fi configuration.
Brands
// brands
- Vodafone Router Login
- AT&T Mobile Hotspot Login
- AT&T Router Login
- Huawei Router Login
- TP-Link Deco Router Login
- TP-Link Router Login
- NETGEAR Router Login – routerlogin.net
- Verizon Fios Router Login
- Aztech Router Login
- Aztelekom Router Login
- Belkin Router Login
- Converge Router Login
- IndiHome Router Login
- Jazztel Router Login
- Linksys Router Login
- Natcom Router Login
- Orange DarBox Login
- Orange Funbox Login
- Orange Livebox Login
- Orange Router Login
- UZTELECOM Router Login
- ZTE Router Login
- Alcatel-Lucent Router Login
- D-Link Router Login
- iiNet Modem Login
top 25 brands
iiNet
// router overview
Iinet provides various modem models including the TG-789, Smart Modem Gateway, Sagemcom 5866 5G, and Nokia FastMile 5G. Login details vary by model, with some requiring credentials from a sticker on the modem. The admin interface allows Wi-Fi and network configuration.
- Manufacturer
- Iinet
- Device type
- modem
- Common models
- TG-789 Broadband Gateway, Smart Modem Gateway (VX420-G2H, TP-Link VX220-G2V, VX420-G2V, VR1600v), Sagemcom 5866 5G Modem, Nokia FastMile 5G Modem
- Firmware
- TG-789 · Australia / Smart Modem Gateway · Australia
Iinet modems often use ISP-specific firmware with pre-configured settings, unlike generic retail routers. Login details may vary by model, with some requiring credentials from a physical sticker.
Web interface
// common ip addresses
Models on record
// models
- TG-789 Broadband GatewayDefault credentials: admin/admin or from sticker
- Smart Modem Gateway (VX420-G2H, TP-Link VX220-G2V, VX420-G2V, VR1600v)Default password: admin
- Sagemcom 5866 5G ModemUsername: admin, password from barcode sticker
- Nokia FastMile 5G ModemUsername: userAdmin, password from barcode sticker
Log in to your Iinet modem
// login steps
- 01
Open the iiNet web interface at 10.1.1.1 or 192.168.1.1 or 192.168.1.254.
- 02
Make sure your device (computer, phone, or tablet) is connected to the modem — either via Wi-Fi or with an Ethernet cable plugged directly into the modem.
- 03
Open any web browser and type http://10.1.1.1 into the address bar. Press Enter. If the page does not load, try 192.168.1.1 or 192.168.0.1 instead.
- 04
Wait for the login page to appear. This may take a few seconds.
- 05
Enter admin as the username and admin as the password. Then click the login button.
- 06
After logging in, you will see the modem dashboard where you can manage all settings.
Change the Wi-Fi password on iiNet
// wifi key
- 01
Log in to the modem admin interface.
- 02
Go to 'Wireless Security' or 'Wi-Fi Password' settings.
- 03
Enter the new password in the 'Pre-Shared Key' or 'Password' field.
- 04
Save the changes and reconnect devices.
Change the Wi-Fi name on iiNet
// wifi name
- 01
Log in to the modem admin interface.
- 02
Navigate to 'Wireless' or 'Wi-Fi Settings' (exact name varies by model).
- 03
Locate the 'SSID' or 'Network Name' field.
- 04
Enter the new Wi-Fi name and save changes.
Factory reset this iiNet
// factory reset
- 01
Locate the reset button (usually on the back of the modem).
- 02
Press and hold for 10-15 seconds using a paperclip.
- 03
Wait for the modem to reboot (may take a few minutes).
- 04
Reconfigure Wi-Fi and admin settings if needed.
Change the admin password on iiNet
// admin password
- 01
Log in to the modem admin interface.
- 02
Navigate to 'Administration' or 'System Settings'.
- 03
Find the 'Change Password' option.
- 04
Enter the current and new admin passwords, then save.
Device information
// device intel
Device information
Smart Modem Gateway VX420-G2H or TP-Link VX220-G2V, VX420-G2V, VR1600v
Smart Modem Gateway VX420-G2H or TP-Link VX220-G2V, VX420-G2V, VR1600v
Note: By default, Band Steering will be turned ON. This will combine 2.4GHz and 5GHz WiFi networks into one and will switch automatically between the networks depending on the best available Wi-Fi strength. If you turn it OFF, you will see separate 2.4GHz and 5GHz settings.
Make sure Hide SSID is turned off, if it is turned on you won’t be able to see it in Available Wi-Fi Networks when you try to connect it.
If the login page does not open
// diagnostics
Having trouble accessing your Iinet modem settings? Connection issues, rejected credentials, and slow-loading admin pages are common problems. Below are the most frequent issues and how to fix them quickly.
Frequently asked questions
// faq
Related routers and IP addresses
// related