Which address should I use to log in to a Hargray router?

The default login address is 192.168.1.1. Enter it in the address bar of your browser to open the login page. If that does not work, try 192.168.0.1 or 192.168.100.1.

What are the default login credentials for Hargray router?

The most commonly reported default credentials are username admin. These may have been changed by your ISP or during a previous setup. Check the sticker on the router if they do not work.

What can I do if 192.168.1.1 does not open?

Confirm that your device is connected directly to the router. Check the address for typos. Restart the router and wait about 30 seconds. Disable any VPN or proxy connections. If the problem persists, look up the correct gateway address in the network settings of your device.

How do I change the Wi-Fi name (SSID)?

In the router admin panel, open the Wi-Fi settings and find the field for the network name (SSID). Enter the new name and save the changes. Your devices will find the network under the new name.

I have multiple routers — which one am I logging into?

Make sure you are connected to the specific router you want to configure. Each device on the network may have a different admin address. Check which gateway your device is currently using in the network settings.

Brand

Hargray Router Login

Need to configure your Hargray router? You can access the router settings by entering 192.168.1.1 in a browser. This guide covers the login process, default username and password, and how to update the Wi-Fi name and password.

Hargray

// router overview

Hargray routers, such as the Calix GigaHub 812G-1, use a web-based interface for configuration. The default login IP is 192.168.1.1, and the username is typically 'admin'. Hargray routers are often customized with ISP-specific firmware.

Manufacturer: Hargray
Device type: router
Common models: Calix GigaHub 812G-1
Firmware: Hargray Custom Firmware · Southeastern USA

Hargray routers often come with ISP-specific firmware tailored for their network, unlike generic routers which use standard firmware. This customization ensures better compatibility and performance on Hargray's network.

Web interface

// common ip addresses

192.168.1.1PrimaryOn record 192.168.0.1Alternative login IP occasionally used

Models on record

// models

Calix GigaHub 812G-1Commonly used by Hargray, supports advanced Wi-Fi settings

Log in to your Hargray router

// login steps

01
Open the Hargray web interface at 192.168.1.1 or 192.168.0.1.
02
Make sure your device (computer, phone, or tablet) is connected to the router — either via Wi-Fi or with an Ethernet cable plugged directly into the router.
03
Open any web browser and type http://192.168.1.1 into the address bar. Press Enter. If the page does not load, try 192.168.0.1 or 192.168.100.1 instead.
04
Wait for the login page to appear. This may take a few seconds.
05
Enter admin as the username. The password is usually unique to your device — check the sticker on the back of the router or your ISP documentation.
06
After logging in, you will see the router dashboard where you can manage all settings.

Change the Wi-Fi password on Hargray

// wifi key

01
Log in to the Hargray router web interface at 192.168.1.1.
02
Navigate to Wireless > Security Settings.
03
Enter the new Wi-Fi Password in the appropriate field.
04
Click Apply to save the changes.

Change the Wi-Fi name on Hargray

// wifi name

01
Log in to the Hargray router web interface at 192.168.1.1.
02
Navigate to Wireless > 2.4G Network > SSID Setup.
03
Enter the new Wi-Fi Network Name in the Rename SSID field.
04
Click Apply to save the changes.

Factory reset this Hargray

// factory reset

01
Locate the reset button on the back of the Hargray router.
02
Press and hold the reset button for 10 seconds using a paperclip.
03
Wait for the router to reboot and restore factory settings.

Change the admin password on Hargray

// admin password

01
Log in to the Hargray router web interface at 192.168.1.1.
02
Navigate to Administration > Password Settings.
03
Enter the current password and the new password in the respective fields.
04
Click Apply to save the changes.

Device information

// device intel

eero PRO 6E

Note: Eero routers currently do not support a web interface. To change any default settings, you need to install the Eero mobile app on Android or iOS.

Calix GigaHub 812G-1

For dual-band routers, you need to configure 2.4GHz and 5GHz networks separately.

If the login page does not open

// diagnostics

Having trouble accessing your Hargray router settings? Connection issues, rejected credentials, and slow-loading admin pages are common problems. Below are the most frequent issues and how to fix them quickly.

Frequently asked questions

// faq

Related routers and IP addresses

// related

Pages that share this brand or this address.

IP addresses

192.168.1.1

All IPs All brands All hosts