Which address should I use to log in to a Go modem?

The default login address is 192.168.1.254. Enter it in the address bar of your browser to open the login page. If that does not work, try 192.168.1.1 or 192.168.0.1.

What are the default login credentials for GO modem?

The most commonly reported default credentials are advanceduser / advanced. These may have been changed by your ISP or during a previous setup. Check the sticker on the modem if they do not work.

What can I do if 192.168.1.254 does not open?

Confirm that your device is connected directly to the modem. Check the address for typos. Restart the modem and wait about 30 seconds. Disable any VPN or proxy connections. If the problem persists, look up the correct gateway address in the network settings of your device.

How do I reset a Go modem to factory settings?

Press and hold the reset button on the back of the modem for at least 10 seconds. The modem will restart with factory defaults, including the original login credentials. Note that this will also erase any custom settings.

How do I change the Wi-Fi name (SSID)?

In the modem admin panel, open the Wi-Fi settings and find the field for the network name (SSID). Enter the new name and save the changes. Your devices will find the network under the new name.

Brand

GO Modem Login

Looking for the login page of your GO modem? The most common login address is 192.168.1.254. Some models also respond on 192.168.1.1. This guide walks you through the login, default credentials, and basic Wi-Fi configuration.

GO

// router overview

Go modems primarily use 192.168.1.254 for admin access with 'advanceduser' as the default username. Their web interface varies slightly between Technicolor and Sagemcom models but maintains consistent login credentials.

Manufacturer: Go
Device type: modem
Common models: Technicolor DGA0122 / TG789vac v2, Sagemcom FAST5370AIR, Technicolor TG799vn v2 / TG588v / TG589vn series
Firmware: Technicolor · Europe/AU / Sagemcom · Middle East

Unlike consumer routers, Go modems often lock advanced features like admin password changes, focusing on ISP-managed configurations. The dual-brand approach (Technicolor/Sagemcom) creates minor interface variations.

Web interface

// common ip addresses

192.168.1.254PrimaryOn record 192.168.1.1Alternate IP for some older models

Models on record

// models

Technicolor DGA0122 / TG789vac v2Access Wi-Fi settings via Wireless > Access Points
Sagemcom FAST5370AIRWi-Fi settings under Wi-Fi > Basic
Technicolor TG799vn v2 / TG588v / TG589vn seriesRequires switching to 'advanceduser' via User menu

Log in to your Go modem

// login steps

01
Open the GO web interface at 192.168.1.254 or 192.168.1.1.
02
Open a browser and type http://192.168.1.254 in the address bar.
03
Enter the Username: advanceduser and Password and click Login.
04
You will be logged in to the GO modem settings.

Change the Wi-Fi password on GO

// wifi key

01
Access admin panel at 192.168.1.254
02
Go to Wireless Security or WPA Pre-Shared Key section
03
Enter new password (8-63 characters recommended)
04
Apply changes (disconnects all devices)

Change the Wi-Fi name on GO

// wifi name

01
Log in at 192.168.1.254 as 'advanceduser'
02
Navigate to Wireless > Access Points (Technicolor) or Wi-Fi > Basic (Sagemcom)
03
Edit the SSID Name field for 2.4GHz or 5GHz networks
04
Save changes (may require modem reboot)

Factory reset this GO

// factory reset

01
Locate recessed reset button (usually on back panel)
02
Press and hold for 15+ seconds using a paperclip
03
Wait for all lights to blink simultaneously
04
Reconfigure from scratch after 2-minute reboot

Change the admin password on GO

// admin password

01
Warning: No documented method found for changing 'advanceduser' password
02
Contact Go support for assistance with admin credential changes

If the login page does not open

// diagnostics

Having trouble accessing your Go modem settings? Connection issues, rejected credentials, and slow-loading admin pages are common problems. Below are the most frequent issues and how to fix them quickly.

Frequently asked questions

// faq

Related routers and IP addresses

// related

Pages that share this brand or this address.

IP addresses

192.168.1.254

All IPs All brands All hosts

Brands

GO

Web interface

Models on record

Log in to your Go modem

Change the Wi-Fi password on GO

Change the Wi-Fi name on GO

Factory reset this GO

Change the admin password on GO

If the login page does not open

Can't reach 192.168.1.254

Login page not loading

192.168.1.254 is not reachable

Login credentials are not accepted

The page loads very slowly or times out

Wrong IP address?

How to reset the modem to factory settings