IP-Portal.org
Brand

Fibrus Router Login

Looking for the login page of your Fibrus router? The most common login address is 192.168.1.254. Some models also respond on 192.168.1.1. This guide walks you through the login, default credentials, and basic Wi-Fi configuration.

Brands

// brands

top 25 brands

Fibrus

// router overview

Fibrus routers typically use 192.168.1.254 for web admin access. Default credentials include 'userAdmin' as the username, with the password found on the router label. Some models may require the Eero app for configuration.

Manufacturer
Fibrus
Device type
router
Common models
Nokia G-2425-B, Eero 6
Firmware
Fibrus Custom · UK/NI

Fibrus routers differ from similar brands by combining both ISP-specific firmware (for their Nokia models) and consumer mesh systems (Eero models). The Nokia variants maintain traditional web interfaces while Eero models require mobile app configuration.

Web interface

// common ip addresses

192.168.1.254PrimaryOn record192.168.1.1Alternative IP for some Fibrus models

Models on record

// models

  • Nokia G-2425-BUses web interface at 192.168.1.254
  • Eero 6Requires Eero app for setup

Log in to your Fibrus router

// login steps

  1. 01

    Open the Fibrus web interface at 192.168.1.254 or 192.168.1.1.

  2. 02

    Make sure your device (computer, phone, or tablet) is connected to the router — either via Wi-Fi or with an Ethernet cable plugged directly into the router.

  3. 03

    Open any web browser and type http://192.168.1.254 into the address bar. Press Enter. If the page does not load, try 192.168.1.1 or 192.168.0.1 instead.

  4. 04

    Wait for the login page to appear. This may take a few seconds.

  5. 05

    Enter userAdmin as the username. The password is usually unique to your device — check the sticker on the back of the router or your ISP documentation.

  6. 06

    After logging in, you will see the router dashboard where you can manage all settings.

Change the Wi-Fi password on Fibrus

// wifi key

  1. 01

    Log in to the Fibrus admin panel at 192.168.1.254

  2. 02

    Go to Network > Wireless Security

  3. 03

    Locate the Pre-Shared Key (PSK) field

  4. 04

    Enter your new Wi-Fi password

  5. 05

    Click Save to apply changes

Change the Wi-Fi name on Fibrus

// wifi name

  1. 01

    Log in to the Fibrus admin panel at 192.168.1.254

  2. 02

    Navigate to Network > Wireless (2.4GHz) or Wireless (5GHz)

  3. 03

    Enter the new Wi-Fi name in the SSID Name field

  4. 04

    Click Save to apply changes

Factory reset this Fibrus

// factory reset

  1. 01

    Locate the reset button on your Fibrus router (usually a small hole)

  2. 02

    Use a paperclip to press and hold for 10-15 seconds

  3. 03

    Wait for all lights to blink and router to reboot

  4. 04

    Router will restore factory settings

Change the admin password on Fibrus

// admin password

  1. 01

    Log in to the Fibrus admin panel using current credentials

  2. 02

    Navigate to System > Admin Password (confidence: medium - menu location may vary)

  3. 03

    Enter current password, then new password twice

  4. 04

    Click Save to update credentials

Device information

// device intel

eero 6

Note: Eero routers currently do not support a web interface. To change any default settings, you need to install the Eero mobile app on Android or iOS.

Nokia G-2425-B

Note: The Admin IP, Username, and Password are printed on a sticker on the back of the router.

If the login page does not open

// diagnostics

Having trouble accessing your Fibrus router settings? Connection issues, rejected credentials, and slow-loading admin pages are common problems. Below are the most frequent issues and how to fix them quickly.

Frequently asked questions

// faq

Related routers and IP addresses

// related

Pages that share this brand or this address.

IP addresses

192.168.1.254
All IPsAll brandsAll hosts