Which address should I use to log in to a Entel router?

The default login address is 192.168.1.1. Enter it in the address bar of your browser to open the login page. If that does not work, try 192.168.0.1 or 192.168.100.1.

What are the default login credentials for Entel router?

The most commonly reported default credentials are username user. These may have been changed by your ISP or during a previous setup. Check the sticker on the router if they do not work.

What can I do if 192.168.1.1 does not open?

Confirm that your device is connected directly to the router. Check the address for typos. Restart the router and wait about 30 seconds. Disable any VPN or proxy connections. If the problem persists, look up the correct gateway address in the network settings of your device.

My ISP changed the default credentials — what now?

Many Internet service providers set custom login credentials during installation. Check the documentation your ISP provided, or contact their support. A factory reset will restore manufacturer defaults but may also reset Internet connection settings.

I have multiple routers — which one am I logging into?

Make sure you are connected to the specific router you want to configure. Each device on the network may have a different admin address. Check which gateway your device is currently using in the network settings.

Brand

Entel Router Login

A complete guide to the Entel router admin panel — covering the login page, default credentials, Wi-Fi name and password changes, and what to do if the router page does not open.

Entel

// router overview

Entel routers are commonly used in South America, particularly in Chile, and often feature ZTE and Huawei models. Default login credentials are typically found on a sticker on the router. The web interface varies slightly between models, with specific IP addresses for each.

Manufacturer: Entel
Device type: router
Common models: ZTE F660, Huawei B310s-518, Huawei HG8145V
Firmware: Entel Chile · Chile

Entel routers often feature specific firmware tailored for South American ISPs, particularly in Chile. The web interface and default settings may differ slightly from global versions of the same models.

Web interface

// common ip addresses

192.168.1.1PrimaryOn record 192.168.8.1Common IP for Huawei B310s-518 192.168.100.1Common IP for Huawei HG8145V

Models on record

// models

ZTE F660Default username: user, password: user
Huawei B310s-518Default username: admin, password: admin
Huawei HG8145VDefault username: root, password: adminHW

Log in to your Entel router

// login steps

01
Open the Entel web interface at 192.168.1.1 or 192.168.8.1 or 192.168.100.1.
02
Make sure your device (computer, phone, or tablet) is connected to the router — either via Wi-Fi or with an Ethernet cable plugged directly into the router.
03
Open any web browser and type http://192.168.1.1 into the address bar. Press Enter. If the page does not load, try 192.168.0.1 or 192.168.100.1 instead.
04
Wait for the login page to appear. This may take a few seconds.
05
Enter user as the username. The password is usually unique to your device — check the sticker on the back of the router or your ISP documentation.
06
After logging in, you will see the router dashboard where you can manage all settings.

Change the Wi-Fi password on Entel

// wifi key

01
Log in to the router's web interface using the appropriate IP address.
02
Navigate to Network > WLAN > Security Settings (ZTE F660) or Configuración > WLAN > Config. Seguridad WLAN (Huawei B310s-518) or WLAN > Security Settings (Huawei HG8145V).
03
Enter the new Wi-Fi password in the Password or Pre-Shared Key field.
04
Click Submit or Save to apply the changes.

Change the Wi-Fi name on Entel

// wifi name

01
Log in to the router's web interface using the appropriate IP address.
02
Navigate to Network > WLAN > SSID Settings (ZTE F660) or Configuración > WLAN > Config. Básica WLAN (Huawei B310s-518) or WLAN > 2.4G Basic Network Settings (Huawei HG8145V).
03
Enter the desired Wi-Fi Network Name in the SSID Name or SSID field.
04
Click Submit or Save to apply the changes.

Factory reset this Entel

// factory reset

01
Locate the reset button on the back of the router.
02
Press and hold the reset button for 10-15 seconds using a paperclip or similar tool.
03
Wait for the router to reboot and restore factory settings.

Change the admin password on Entel

// admin password

01
Log in to the router's web interface using the appropriate IP address.
02
Navigate to Management > User Management (ZTE F660) or Configuración > Gestión de Usuarios (Huawei B310s-518) or System > User Management (Huawei HG8145V).
03
Select the admin user and click Edit.
04
Enter the new password in the Password field and confirm it.
05
Click Submit or Save to apply the changes.

If the login page does not open

// diagnostics

Having trouble accessing your Entel router settings? Connection issues, rejected credentials, and slow-loading admin pages are common problems. Below are the most frequent issues and how to fix them quickly.

Frequently asked questions

// faq

Related routers and IP addresses

// related

Pages that share this brand or this address.

IP addresses

192.168.1.1 192.168.8.1

All IPs All brands All hosts

Brands

Entel

Web interface

Models on record

Log in to your Entel router

Change the Wi-Fi password on Entel

Change the Wi-Fi name on Entel

Factory reset this Entel

Change the admin password on Entel

If the login page does not open

Cannot access router web interface

Forgotten admin password

192.168.1.1 is not reachable

Login credentials are not accepted

The page loads very slowly or times out

Wrong IP address?

How to reset the router to factory settings