IP-Portal.org
Brand

Cosmote Router Login

A complete guide to the Cosmote router admin panel — covering the login page, default credentials, Wi-Fi name and password changes, and what to do if the router page does not open.

Brands

// brands

top 25 brands

Cosmote

// router overview

Cosmote routers, primarily ZTE and Speedport models, use 192.168.1.1 for admin access. The default username is 'admin', but no default password is documented. Configuration menus vary by model, with some interfaces in Greek.

Manufacturer
Cosmote
Device type
router
Common models
ZTE Speedport Entry 2i, Speedport Plus, ZTE MC 8020 / MF 297D / MF 289D
Firmware
Cosmote_GR_FW · Greece

Unlike generic routers, Cosmote devices often ship with region-specific firmware (especially Greek interfaces) and may use alternative IPs like 192.168.100.1. The admin panel structure varies significantly between ZTE and Speedport models.

Web interface

// common ip addresses

192.168.1.1PrimaryOn record192.168.0.1Alternative IP for some Cosmote models192.168.100.1Less common, but reported for certain ZTE devices

Models on record

// models

  • ZTE Speedport Entry 2iUses 'Local Network > WLAN > WLAN Basic' for Wi-Fi settings
  • Speedport PlusUses 'Home Network > Basic WLAN settings'
  • ZTE MC 8020 / MF 297D / MF 289DGreek interface with 'Ρυθμίσεις Wi-Fi' menu

Log in to your Cosmote router

// login steps

  1. 01

    Open the Cosmote web interface at 192.168.1.1 or 192.168.0.1 or 192.168.100.1.

  2. 02

    Open a browser and type http://192.168.1.1 in the address bar.

  3. 03

    Enter the Username: admin and Password and click Login.

  4. 04

    You will be logged in to Cosmote router settings.

Change the Wi-Fi password on Cosmote

// wifi key

  1. 01

    Log in to the router settings

  2. 02

    Locate the Wi-Fi security section:

  3. 03

    - ZTE models: WLAN > Security Settings

  4. 04

    - Speedport: Basic WLAN settings > Security

  5. 05

    - Greek interface: Ρυθμίσεις Wi-Fi > Κωδικός πρόσβασης

  6. 06

    Enter new password in the designated field

  7. 07

    Select encryption type (WPA2 recommended)

  8. 08

    Apply changes and reconnect devices

Change the Wi-Fi name on Cosmote

// wifi name

  1. 01

    Log in to the router settings at 192.168.1.1

  2. 02

    Navigate to model-specific menu:

  3. 03

    - ZTE Speedport Entry 2i: Local Network > WLAN > WLAN Basic > WLAN SSID Configuration

  4. 04

    - Speedport Plus: Home Network > Basic WLAN settings > Name and encryption

  5. 05

    - ZTE MC 8020/MF series: Ρυθμίσεις Wi-Fi > Όνομα δικτύου (SSID)

  6. 06

    Enter new Wi-Fi name in the SSID field and save changes

Factory reset this Cosmote

// factory reset

  1. 01

    Locate reset button (usually recessed on back panel)

  2. 02

    Use a paperclip to hold for 10-15 seconds until lights flash

  3. 03

    For ZTE models: Some may require holding WPS + reset buttons simultaneously

  4. 04

    Wait 3 minutes for full reboot

  5. 05

    Note: This will restore Greek interface on region-specific models

Change the admin password on Cosmote

// admin password

  1. 01

    Warning: No default admin password documented for Cosmote routers

  2. 02

    If password was never changed, try leaving field blank

  3. 03

    For changed passwords:

  4. 04

    1. Log in with current credentials

  5. 05

    2. Navigate to System Tools > Password Settings (exact menu varies)

  6. 06

    3. Enter old password and set new one (medium confidence on menu location)

If the login page does not open

// diagnostics

Having trouble accessing your Cosmote router settings? Connection issues, rejected credentials, and slow-loading admin pages are common problems. Below are the most frequent issues and how to fix them quickly.

Frequently asked questions

// faq

Related routers and IP addresses

// related

Pages that share this brand or this address.

IP addresses

192.168.1.1
All IPsAll brandsAll hosts