IP-Portal.org
Brand

Bell Modem Login

Need to configure your Bell modem? You can access the modem settings by entering 192.168.2.1 in a browser. This guide covers the login process, default username and password, and how to update the Wi-Fi name and password.

Brands

// brands

top 25 brands

Bell

// router overview

Bell routers, such as the Home Hub series, often use default credentials and a straightforward web interface. Access is typically through 192.168.2.1, and the admin password may also be the modem's serial number if default credentials fail.

Manufacturer
Bell
Device type
modem
Common models
Home Hub 2000, Home Hub 3000, Connection Hub
Firmware
Bell Home Hub Firmware · Canada

Unlike many ISPs, Bell often uses the modem's serial number as a fallback admin password. Their Home Hub interface is more ISP-customized than generic router UIs, with ISP-specific labels like 'Manage my Wi-Fi'.

Web interface

// common ip addresses

192.168.2.1PrimaryOn record192.168.1.1Alternative IP for some older Bell models192.168.0.1Less common, but documented for certain Bell devices

Models on record

// models

  • Home Hub 2000Commonly uses 192.168.2.1
  • Home Hub 3000Supports advanced Wi-Fi settings via web UI
  • Connection HubOlder model with slightly different menu layout

Log in to your Bell modem

// login steps

  1. 01

    Open the Bell web interface at 192.168.2.1 or 192.168.1.1 or 192.168.0.1.

  2. 02

    Open a browser and type 192.168.2.1 or http://home in the address bar. You can also visit bell.ca/mymodem to access the Wi-Fi settings page.

  3. 03

    Enter the Username: admin and Password: admin and click Log in. If “admin” doesn’t work, enter the Serial Number (S/N) located on the sticker on the back of the modem.

  4. 04

    You will be logged in to the Bell Home Hub settings.

Change the Wi-Fi password on Bell

// wifi key

  1. 01

    Log in to the Bell Home Hub settings.

  2. 02

    Navigate to 'Manage my Wi-Fi' or 'Wireless Settings'.

  3. 03

    Locate the 'Wi-Fi Password' or 'Network Key' field.

  4. 04

    Enter the new password (8-63 characters recommended).

  5. 05

    Click 'Apply' or 'Save' to update the settings.

Change the Wi-Fi name on Bell

// wifi name

  1. 01

    Log in to the Bell Home Hub settings at 192.168.2.1.

  2. 02

    Click 'Manage my Wi-Fi' in the main menu.

  3. 03

    For Connection Hub models, select 'Wireless' from the left menu.

  4. 04

    Ensure 'Primary Wi-Fi network' is set to 'ON'.

  5. 05

    Enter the new Wi-Fi name (SSID) in the 'Network name (SSID)' field.

  6. 06

    Click 'Apply' or 'Save' to confirm changes.

Factory reset this Bell

// factory reset

  1. 01

    Locate the reset button (usually on the back of the modem).

  2. 02

    Use a paperclip to press and hold for 15-30 seconds.

  3. 03

    Wait for all lights to blink and the modem to reboot.

  4. 04

    Note: This will restore factory defaults, including Wi-Fi credentials.

Change the admin password on Bell

// admin password

  1. 01

    Log in using the default credentials (admin/admin).

  2. 02

    Navigate to 'Administration' or 'System Settings'.

  3. 03

    Select 'Change Admin Password' (exact label may vary).

  4. 04

    Enter the current and new passwords.

  5. 05

    Save changes. Note: Some models may require the serial number for reset.

If the login page does not open

// diagnostics

Having trouble accessing your Bell modem settings? Connection issues, rejected credentials, and slow-loading admin pages are common problems. Below are the most frequent issues and how to fix them quickly.

Frequently asked questions

// faq