IP-Portal.org
Brand

BeFibre Router Login

Befibre devices use a web-based admin panel for configuration. Common default credentials are listed below. This page also includes troubleshooting tips if the login page does not load.

Brands

// brands

top 25 brands

BeFibre

// router overview

BeFibre routers typically use 192.168.1.1 for admin access, with 'admin' as the default username. Some models like Linksys SPNMX42/56 and Adtran 854 have specific Wi-Fi settings paths documented.

Manufacturer
Befibre
Device type
router
Common models
Linksys SPNMX42, Linksys SPNMX56, Adtran 854
Firmware
BeFibre Home · UK

BeFibre routers often rebrand Linksys and Adtran hardware with custom firmware, focusing on simplified ISP-managed settings compared to retail versions of the same models.

Web interface

// common ip addresses

192.168.1.1PrimaryOn record192.168.0.1Alternative IP for certain BeFibre models192.168.100.1Less common, but documented for some units10.0.0.1Rarely used, check router label if others fail

Models on record

// models

  • Linksys SPNMX42Wi-Fi settings under 'Router Settings > Wi-Fi Settings'
  • Linksys SPNMX56Same interface as SPNMX42
  • Adtran 854Wi-Fi settings under 'WiFi > Networks'

Log in to your Befibre router

// login steps

  1. 01

    Open the BeFibre web interface at 192.168.1.1 or 192.168.0.1 or 192.168.100.1 or 10.0.0.1.

  2. 02

    Open a browser and type http://192.168.1.1 in the address bar.

  3. 03

    Enter the Username and Password and click Login.

  4. 04

    You will be logged in to the BeFibre router settings.

Change the Wi-Fi password on BeFibre

// wifi key

  1. 01

    Log in at 192.168.1.1 (username: admin)

  2. 02

    For Linksys models: Navigate to 'Router Settings > Wi-Fi Settings'

  3. 03

    For Adtran: Go to 'WiFi > Networks'

  4. 04

    Locate the Wi-Fi password/Preshared Key field

  5. 05

    Enter new password (typically 8-63 characters)

  6. 06

    Save changes and reconnect devices

Change the Wi-Fi name on BeFibre

// wifi name

  1. 01

    Log in at 192.168.1.1 (username: admin)

  2. 02

    For Linksys models: Navigate to 'Router Settings > Wi-Fi Settings'

  3. 03

    For Adtran: Go to 'WiFi > Networks'

  4. 04

    Edit the 'Wi-Fi name' (Linksys) or 'SSID' (Adtran) field

  5. 05

    Save changes and allow router to reboot

Factory reset this BeFibre

// factory reset

  1. 01

    Locate reset button (usually recessed on back panel)

  2. 02

    Use a paperclip to hold for 10-15 seconds

  3. 03

    Wait for all lights to blink simultaneously

  4. 04

    Router will reboot with default settings

  5. 05

    Reconfigure using original Wi-Fi credentials (found on router label)

Change the admin password on BeFibre

// admin password

  1. 01

    Log in with current credentials at 192.168.1.1

  2. 02

    Navigate to 'Administration' or 'System Tools' (exact location varies by model)

  3. 03

    Select 'Change Password' or equivalent

  4. 04

    Enter current and new passwords twice

  5. 05

    Save changes (may require re-login)

If the login page does not open

// diagnostics

Having trouble accessing your Befibre router settings? Connection issues, rejected credentials, and slow-loading admin pages are common problems. Below are the most frequent issues and how to fix them quickly.

Frequently asked questions

// faq

Related routers and IP addresses

// related

Pages that share this brand or this address.

IP addresses

192.168.1.1
All IPsAll brandsAll hosts