Which address should I use to log in to a Atel router?

The default login address is 192.168.0.1. Enter it in the address bar of your browser to open the login page. If that does not work, try 192.168.1.1 or 192.168.100.1.

What are the default login credentials for ATEL router?

The most commonly reported default credentials are username admin. These may have been changed by your ISP or during a previous setup. Check the sticker on the router if they do not work.

What can I do if 192.168.0.1 does not open?

Confirm that your device is connected directly to the router. Check the address for typos. Restart the router and wait about 30 seconds. Disable any VPN or proxy connections. If the problem persists, look up the correct gateway address in the network settings of your device.

I have multiple routers — which one am I logging into?

Make sure you are connected to the specific router you want to configure. Each device on the network may have a different admin address. Check which gateway your device is currently using in the network settings.

How do I reset a Atel router to factory settings?

Press and hold the reset button on the back of the router for at least 10 seconds. The router will restart with factory defaults, including the original login credentials. Note that this will also erase any custom settings.

Brand

ATEL Router Login

Atel devices use a web-based admin panel for configuration. Common default credentials are listed below. This page also includes troubleshooting tips if the login page does not load.

ATEL

// router overview

Atel routers are commonly used in residential and small office setups, offering basic wireless management through a straightforward web interface. The admin panel is accessible via 192.168.0.1 with 'admin' as the default username.

Manufacturer: Atel
Device type: router
Common models: Atel R100, Atel R200
Firmware: Atel-ISP_v1.2 · Europe

Atel routers prioritize simplicity over advanced features, with a no-frills web interface compared to brands like TP-Link or Netgear. Their default IP and username are consistent across most models, reducing setup confusion.

Web interface

// common ip addresses

192.168.0.1PrimaryOn record 192.168.1.1Alternate IP for some Atel models 192.168.100.1Less common, but documented for certain Atel units 192.168.1.254Rarely used, but mentioned in support forums 10.0.0.1Occasionally used in specific ISP configurations

Models on record

// models

Atel R100Basic dual-band router with standard features
Atel R200Mid-range model with enhanced Wi-Fi coverage

Log in to your Atel router

// login steps

01
Open the ATEL web interface at 192.168.0.1 or 192.168.1.1 or 192.168.100.1 or 192.168.1.254 or 10.0.0.1.
02
Connect your device to the router via Wi-Fi or an Ethernet cable.
03
Open a browser and type http://192.168.0.1 in the address bar.
04
Enter the Username: admin and Password and click Login.
05
You will be logged in to the ATEL router settings.

Change the Wi-Fi password on ATEL

// wifi key

01
Log in to the Atel router admin panel at 192.168.0.1.
02
Go to 'Settings' > 'WiFi' > 'WiFi Settings'.
03
Find the 'Password' field under security settings.
04
Enter your new Wi-Fi password.
05
Click 'Apply' or 'Save' to update the password.

Change the Wi-Fi name on ATEL

// wifi name

01
Log in to the Atel router admin panel at 192.168.0.1.
02
Navigate to 'Settings' > 'WiFi' > 'WiFi Settings'.
03
Locate the 'Network Name (SSID)' field.
04
Enter your desired Wi-Fi name.
05
Click 'Apply' or 'Save' to confirm changes.

Factory reset this ATEL

// factory reset

01
Locate the reset button on the back of the Atel router.
02
Use a paperclip to press and hold the button for 10-15 seconds.
03
Wait for the router to reboot; all lights will flash during reset.
04
Reconfigure the router via 192.168.0.1 after reset completes.

Change the admin password on ATEL

// admin password

01
Log in to the Atel router admin panel at 192.168.0.1.
02
Navigate to 'System' > 'Admin Password' (confidence: medium).
03
Enter the current username ('admin') and old password (if set).
04
Input the new password in the designated fields.
05
Click 'Save' to apply the new admin password.

If the login page does not open

// diagnostics

Having trouble accessing your Atel router settings? Connection issues, rejected credentials, and slow-loading admin pages are common problems. Below are the most frequent issues and how to fix them quickly.

Frequently asked questions

// faq

Related routers and IP addresses

// related

Pages that share this brand or this address.

IP addresses

192.168.0.1

All IPs All brands All hosts

Brands

ATEL

Web interface

Models on record

Log in to your Atel router

Change the Wi-Fi password on ATEL

Change the Wi-Fi name on ATEL

Factory reset this ATEL

Change the admin password on ATEL

If the login page does not open

Can't access 192.168.0.1

Wi-Fi not appearing

192.168.0.1 is not reachable

Login credentials are not accepted

The page loads very slowly or times out

Wrong IP address?

How to reset the router to factory settings