IP-Portal.org
Brand

Altafiber Router Login

Need to configure your Altafiber router? You can access the router settings by entering 192.168.1.1 in a browser. This guide covers the login process, default username and password, and how to update the Wi-Fi name and password.

Brands

// brands

top 25 brands

Altafiber

// router overview

Altafiber routers, such as the Zyxel 4381 and 660 Gateway, provide straightforward access to network settings via a web interface. Users can log in using the default IP address 192.168.1.1 and credentials admin/1234. The routers support easy Wi-Fi and admin password changes through their intuitive menus.

Manufacturer
Altafiber
Device type
router
Common models
Zyxel 4381, Zyxel 660 Gateway
Firmware
Zyxel Firmware · North America

Altafiber routers differ from similar brands by offering a straightforward web interface for network management, unlike Eero routers which require a dedicated app. The default credentials and IP addresses are consistent across Altafiber models, simplifying the login process.

Web interface

// common ip addresses

192.168.1.1PrimaryOn record192.168.0.1Alternative login IP for some Altafiber models

Models on record

// models

  • Zyxel 4381Gateway model with web interface access
  • Zyxel 660 GatewayGateway model with web interface access

Log in to your Altafiber router

// login steps

  1. 01

    Open the Altafiber web interface at 192.168.1.1 or 192.168.0.1.

  2. 02

    Make sure your device (computer, phone, or tablet) is connected to the router — either via Wi-Fi or with an Ethernet cable plugged directly into the router.

  3. 03

    Open any web browser and type http://192.168.1.1 into the address bar. Press Enter. If the page does not load, try 192.168.0.1 or 192.168.100.1 instead.

  4. 04

    Wait for the login page to appear. This may take a few seconds.

  5. 05

    Enter admin as the username and 1234 as the password. Then click the login button.

  6. 06

    After logging in, you will see the router dashboard where you can manage all settings.

Change the Wi-Fi password on Altafiber

// wifi key

  1. 01

    Log in to the Altafiber router web interface at 192.168.1.1.

  2. 02

    Navigate to Network Settings > Wireless > Security.

  3. 03

    Enter the new Wi-Fi password in the Pre-Shared Key field.

  4. 04

    Click Save to apply the changes.

Change the Wi-Fi name on Altafiber

// wifi name

  1. 01

    Log in to the Altafiber router web interface at 192.168.1.1.

  2. 02

    Navigate to Network Settings > Wireless > General.

  3. 03

    Enter the new Wi-Fi Network Name in the Wireless Network Name (SSID) field.

  4. 04

    Click Save to apply the changes.

Factory reset this Altafiber

// factory reset

  1. 01

    Locate the reset button on the back of the Altafiber router.

  2. 02

    Press and hold the reset button for 10 seconds using a paperclip or similar tool.

  3. 03

    Wait for the router to reboot and restore factory settings.

Change the admin password on Altafiber

// admin password

  1. 01

    Log in to the Altafiber router web interface at 192.168.1.1.

  2. 02

    Navigate to System Settings > Admin Password.

  3. 03

    Enter the current password, then the new password twice.

  4. 04

    Click Save to apply the changes.

Device information

// device intel

eero Max 7 / Pro 6E

Note: Eero routers currently do not support a web interface. To change any default settings, you need to install the Eero mobile app on Android or iOS.

Zyxel 4381 / 660 Gateway

For dual-band routers, you need to configure 2.4GHz and 5GHz networks separately.

If the login page does not open

// diagnostics

Having trouble accessing your Altafiber router settings? Connection issues, rejected credentials, and slow-loading admin pages are common problems. Below are the most frequent issues and how to fix them quickly.

Frequently asked questions

// faq

Related routers and IP addresses

// related

Pages that share this brand or this address.

IP addresses

192.168.1.1
All IPsAll brandsAll hosts