IP-Portal.org
Host

You searched for

myrouter.local

But you found us!

myrouter.local is the web-based management interface for Linksys routers. Through this address you can log in and configure settings such as the Wi-Fi name, password, and network configuration.

Hostnames

// hosts

top 25 hosts

myrouter.local

// host overview

myrouter.local is the local hostname for accessing the web-based setup page of a Linksys router. It only works when connected to the router's network, either via Ethernet or WiFi.

Hostname
myrouter.local
Kind
Local mDNS name
Brand
Linksys

Unlike typing a numeric IP like 192.168.1.1, myrouter.local uses a human-readable name that resolves locally on your network.

Type this, not a search

// address bar

Address bar

http://myrouter.local

  1. Use the browser address bar. A search box will look up myrouter.local on the public internet and miss the router.
  2. Type http://myrouter.local with no www and no https. You must be joined to this router's Wi-Fi.

  • Do not search for myrouter.local

    Type 'http://myrouter.local' directly into the browser's address bar, not a search engine.

  • Avoid adding 'www' or 'https'

    Use 'http://myrouter.local' as written – no 'www' prefix or 'https' security layer is needed for this local address.

What is myrouter.local?

// briefing

myrouter.local is a local web address that gives you access to the admin panel of your Linksys router. This address only works when you are connected to the router's network — it does not resolve on the public internet.

The .local or .home suffix indicates that this is a local network address resolved by mDNS or your router's built-in DNS. It is not accessible from outside your network.

This hostname is specific to Linksys devices. Other manufacturers use different addresses — check the sticker on your router for the correct URL.

The default login credentials for devices accessible via myrouter.local are typically username admin and password changed.

How to access the router login page

// login steps

  1. 01

    The first thing that you should do is make sure that the router is powered ON. After that, you need to establish a connection between your router and your PC.

  2. 02

    It is recommended that you establish a wired connection between the router and the PC using an Ethernet cable. If Ethernet cable is not available then you can also establish a wireless connection by connecting to the WiFi network of the router.

  3. 03

    Once a connection has been established between the router and the device, open a web browser on your PC/Laptop.

  4. 04

    In the address bar of the browser, type http://myrouter.local (default web address for web interface) or 192.168.1.1 (default IP address for web interface) and hit Enter.

  5. 05

    A login page will appear and you will have to enter the default username and password to continue. The default username and password for Linksys routers are: Username: blank field Password: admin

  6. 06

    If the login credentials are correct then you will be successfully logged into the web interface of the Linksys router.

Change the Wi-Fi password on myrouter.local

// wifi key

  1. 01

    Login to the web interface at myrouter.local or 192.168.1.1

  2. 02

    Navigate to Wireless > Wireless Settings

  3. 03

    Enter and confirm the new password in the Passphrase field

Change the Wi-Fi name on myrouter.local

// wifi name

  1. 01

    Login to the web interface at myrouter.local or 192.168.1.1

  2. 02

    Go to the Wireless tab and select Wireless Settings

Troubleshooting

// diagnostics

Cannot reach myrouter.local in your browser? Hostname resolution issues, incorrect credentials, and network configuration problems are among the most common causes. Use the steps below to diagnose and fix the issue.

Frequently asked questions

// faq

Related IP addresses and brands

// related

Pages that share this brand or this address.

All IPsAll brandsAll hosts