IP-Portal.org
Host

You searched for

Melogin.cn

But you found us!

Melogin.cn is the web-based management interface. Through this address you can log in and configure settings such as the Wi-Fi name, password, and network configuration.

Hostnames

// hosts

top 25 hosts

Melogin.cn

// host overview

Melogin.cn is a local hostname used to access the admin page of Mercury routers and extenders. It only works when connected to the router's network.

Hostname
Melogin.cn
Kind
Local login name
Fallback IP
192.168.1.253

Typing Melogin.cn uses a local DNS resolution instead of directly accessing the router via its IP address.

Type this, not a search

// address bar

Address bar

http://Melogin.cn

  1. Use the browser address bar. A search box will look up Melogin.cn on the public internet and miss the router.
  2. Type http://Melogin.cn with no www and no https. You must be joined to this router's Wi-Fi.
  3. If the name does not open, use the numeric address 192.168.1.253 instead.

  • Do not search for Melogin.cn

    Typing Melogin.cn into a search engine will not work. Always enter it directly into the browser's address bar.

  • Avoid adding 'www' or 'https'

    Melogin.cn does not support 'www' or 'https'. Simply type 'melogin.cn' as is.

Numeric address

// fallback ip

192.168.1.253

What is Melogin.cn?

// briefing

Melogin.cn is a local web address that gives you access to the admin panel of your router. This address only works when you are connected to the router's network — it does not resolve on the public internet.

Compared to a numeric IP address, Melogin.cn is easier to remember and is provided by the manufacturer as a convenient alternative for accessing the settings page.

If Melogin.cn does not resolve in your browser, you can use the numeric fallback address 192.168.1.253 instead. Both lead to the same admin interface.

How to access the router login page

// login steps

  1. 01

    Make sure your device (computer, phone, or tablet) is connected to the router — either via Wi-Fi or with an Ethernet cable plugged directly into the router.

  2. 02

    Open any web browser and type http://192.168.1.253 into the address bar. Press Enter. If the page does not load, try 192.168.1.1 or 192.168.0.1 instead.

  3. 03

    Wait for the login page to appear. This may take a few seconds.

  4. 04

    Enter the login credentials. If you have never changed them, check the sticker on the back of the router or the documentation from your Internet provider.

  5. 05

    After logging in, you will see the router dashboard where you can manage all settings.

Change the Wi-Fi password on Melogin.cn

// wifi key

  1. 01

    Go to the WiFi settings menu.

  2. 02

    Enter the new password for the extended network.

Change the Wi-Fi name on Melogin.cn

// wifi name

  1. 01

    After logging in, navigate to the WiFi settings section.

  2. 02

    Select the WiFi network you wish to expand.

Troubleshooting

// diagnostics

Cannot reach Melogin.cn in your browser? Hostname resolution issues, incorrect credentials, and network configuration problems are among the most common causes. Use the steps below to diagnose and fix the issue.

Frequently asked questions

// faq